What did you do in the reloading room today?

[Outer Rondacker]

Opened the box my new Henry came in and gave it a good cleaning. Today will be a few test fire shots. Dont know what it is but something about a lever action gets me going. Always wanted a Golden Boy.

[owejia]

Was in the 70's on Friday and saw a carpenter bee, so decide to check my inventory of 38 and 357 bee killer loads, have about 600 total loaded. Will get some target practice in a few more days. Shot all of my 45's last spring so the 38/357 will have to suffice for my bee shooting this year.

[lightman]

Just started boxing up stuff for a future move. I started with my J-words and packed until I ran out of the smaller boxes.

[Texas by God]

All better now and killed six cans in a row.

Sent from my SM-A716U using Tapatalk

[Budzilla 19]

finally got back to this project! NOE 4 cavity mold .45-230 hp. They chamber fine now!

[Mal Paso]

Well I finally have compatible brass. With only 87 pieces of 350 Legend Brass I added a tub of 9mm to the lightman tumbler. The steel pins clean much faster when you have a full load and the 2 calibers separated easily.

I gas checked and lubed another 125 MP358-200s. I'll load them in the clean 350L brass later.

Got a Fedex email saying the HP version is on the way.

[BJung]

Today I made 6 lead ingots from range scrap while doing gardening

[Happy caster]

Managed to size my finger, lol

[toallmy]

managed to size my finger, lol

ouch !!!!!

[Happy caster]

Upside down Lee classic single stage, left hand on the lever and right hand feeding,. Got into a Super rhythm before my left sped up too much. Still laughing about it. Used to read about others doing it and laughed at them. Guess who is the "punch " line now

[uscra112]

Finished the last machining operation on 50 of my "reloadable rimfire" .25 Stevens cases. Saturday made a couple of widgets to enable me to use a Lyman tong tool for loading in the field. No excuses now -have to test a few this afternoon, to see if I need to make a neck sizer, too.

[Mal Paso]

Another 50 358-200 GC

[Texas by God]

I'm looking to establish my iron sight 100yds capabilities with my Krag loaded with IMR 4350 and 165gr btsp Privi bullets- so I'm loading up my Graf brass thusly.

Sent from my SM-A716U using Tapatalk

[LIMPINGJ]

Cast a pile of 32s from a Lee 32 Kieth mold which was from when we did group buys from Lee and a NOE 315-89-WC mold. So now I just need Starline to make a run of 32S&W Long brass so I can shoot the Colt Officers Model Target I bought a few months ago/

[Mandoair]

Traded 1700 S Rifle Primers for a like number of L Pistol Primers today. I’ve been forced to use lp mag since I started loading 10mm. Except for the small pocket 10s where I used S Rifle primers or sp mags. At least will find out which I like better.

[Mal Paso]

I cast a few hundred MP 358-200 GC HP with the Penta Pins. I cycled the mold a few times last night in a 400 degree oven to give the mold some color and ran most of a 25 lb pot through it today. The Pro Melt 2 was at 700F and the mold ran GREAT! Tapping on the pins to dislodge boolits damaged a few so I switched to tapping the mold with my 6oz rawhide mallet, just enough to vibrate and let the pins slide by themselves.

[Mandoair]

I cast a few hundred MP 358-200 GC HP with the Penta Pins. I cycled the mold a few times last night in a 400 degree oven to give the mold some color and ran most of a 25 lb pot through it today. The Pro Melt 2 was at 700F and the mold ran GREAT! Tapping on the pins to dislodge boolits damaged a few so I switched to tapping the mold with my 6oz rawhide mallet, just enough to vibrate and let the pins slide by themselves.

Wow that’s a beauty

[trixter]

I picked up 1000 pieces of 9 mm this morning, came home and set up the APP with the 4 tube case feeder, step one deprime and get ready for the wet tumbler, and even with a whole bunch of interruptions I finished them by 4:45. When I get some of the junk moved in the garage, I can run them through my double barreled (very ancient) wet tumbler. Ill get 500 in each barrel.

[robg]

prepped 100x357mag brass .

[Baltimoreed]

Been reloading brass from last weekends cas shoot, 150 .45colt and just started on .45 Schofields. Also cleaning up gifted .223 and 30-06 brass from a bud. Might go zombie shooting next Saturday with my .45 pcc. Shot clean and came in 22 out of 44 last month. Still waiting scores from the cas shoot.