Need opions

[Crawdaddy]

I have pulled thousands without incident. I am going to Change the way I do it now. I was using a concrete floor while seated in a chair. Needless to say my face is above the puller.

Thanks for posting, don't need my face any uglier.

Glad you are ok.

[fastfire]

I use a 4x4 24" long one end screwed to a 12"x12" plywood for the base.
I hit the end of the 4x4 thinking that if I hit a hard surface (metal of concrete) with that plastic it would break.

[country gent]

I cut a piece of red oak trunk 24" lont parrallel on the ends about 20" in dia years ago and use it for things that need hit against something. Its cured out now for 15-20 years in the corner of the garage and is very hard/ It does great with pullers and light forming tasks, Oak, Hickorey, maple would work very well, cotton wood, pine or soft woods not as well. I have used this for many years.

[firefly1957]

Since the primer was in the case it was the powder that lit as primers blow out very rapidly when unsupported.