Thanx for checking in here. I thought I would start with a few common questions and answers.
My "partner" in this project is the real brains behind our products. Mike has been in Tool & Die work for over 40 years, maybe closer to 50 by now. He is one of those guys that just can't seem to get enough of "work" so after doing a full day at the shop working on Medical/Aerospace parts he goes home to his garage which houses a Mill, Lathe and a few other things. I have been trying to "Stump" him with various ideas and projects for several years, I have pretty much given up on that, hard to even slow him down. Give him an idea and he comes up with a solution. Anyway...
We are focusing on the Ultimate Cannelure Tool although we do have a couple other items available. If you need a Ram for a Rockchucker or similar press threaded for the swaging punches we can do that. Also have a push through type Case Holder Jig for the Harbor Freight cutoff saws but they are pretty time/labor intensive so only doing them occasionally. Other projects needing custom design and build can be discussed, PM me with needs.
Money Orders are best for us, I cash at the Post Office when I ship.
Some commentary etc can be found here, our original thread in the swaging forum
http://castboolits.gunloads.com/show...re-Tool-update
And Here, our last regular Swap/Sell thread
http://castboolits.gunloads.com/show...42#post2863342
That is about it for this one. Check my feedback in Straight Shooters etc.
Thanx again
Kevin