Sorry if I missed it, but what supplier did you get the Jollypop Red from?Originally Posted by Retumbo
|
   
   
|
|
Sorry if I missed it, but what supplier did you get the Jollypop Red from?
https://emeraldcoatings.com/
PBTP Orange Brown RAL 8023 & Smoke’s White Aluminum.
Last edited by Cast10; 04-18-2022 at 05:55 PM.
HP-molds "9 Or 38, 147-154, Bevel Base,HP, NO Lube Groove Mold (Multi Choice)" Casts at 150gr before powder
Smokes Flame Red
Tumbled, with no bb's in Frankford Arsenal vibratory tumbler for 10min. Used ammo trays to keep organized and knock off excess powder
Just having a little fun with my bullets.
That’s awesome!Just having a little fun with my bullets.
If I did that my wife would say I had too much time and would add something to the Honey Do list.
I've been having a problem tumbling my cast bullets in pc to have an even covering. Do you just drop your powder in your tumbler with your cast bullets or do you put everything in a separate bag?
I use a ikea lock’n’lock style plastic container (cool whip and country crock containers work too) and shake with Plastic air soft bbs for 1-2 minutes than sift the BBs and excess powder in a little container sifter I made by drilling bb sized holes in the bottom of one so they fall into the other) than dump, stand up, and bake.
Powder used is also critical. I like Smokes Pc powder but not all brands/colors work as well. Smoke clear is my preferred followed by black. The JD Green and Carolina blue work great too but their a little fussier than clear of black I’ve found personally.
6.5 bullets shake and bake with cheap powder. I didn't wipe the bucket and there was trace of previous black PC in it. Interesting marble pattern.
Nice looking bullets, what mold is that? I'm thinking of casting for my 6.5mm.
6.5 bullets shake and bake with cheap powder. I didn't wipe the bucket and there was trace of previous black PC in it. Interesting marble pattern.
Noe 145gr
Finally was able to coat 110 pounds of the MP 356- 130gr with smokes powder. With the 110 pounds of 9mm and the maybe 80 pounds of 30 cal, I still have plenty of powder to work with.
Sent from my iPhone using Tapatalk
Pulled out the Old H&G # 20 mold ...
Using Smoke's powder ..
Black , clear , blue and red
It is much easier to fool people ,
than to convince them they have been fooled !
If you can read this , thank a teacher ...
If you can read this in English , .. thank a Vet !
Some 9’s today!traffic purple, with blue flecks, traffic purple with white mixed in, clear,(my favorite), Carolina blue.
Time to size them and do a little loading!
124 grain
Range scrap with 2% tin. Baked @420*f for an hour, and splashed in cold water.
I firmly believe that you should only get treated by how you act, not by who or what you are!!
9mm with Eastwood Mirror Black:
I just PCd my first run of our .402 group buy HP mold. It's raining here so I figured I wouldn't have that great of coverage. I even used old powder I had sitting it Tupperware wit air soft BBs. I used Smokes powder. First go was traffic purple with black and blue mixed in. I noticed the HP cavities didn't want to have PC stick to them today. I had a few bright specs of bare alloy showing as well. All colors I tried did the same but seemed to flow into the spots but not the HP cavities. Not to worried about the HP areas anyway. I then had some red, Green, and orange mixed from last year or longer. Made a nice brown. I ran out so I dumped some.orange in I had in a another Tupperware tumbling container.
I'll have to get a .401 lee sizer ordered up!
Last edited by Tripplebeards; 09-10-2022 at 01:01 PM.
My brother requested some zombie themed bullets for a 40sw. Tumbled in smoke's yellow green then sprinkled with a flame red that wouldn't tumble. He specifically requested "something obnoxious" and I think this works
"The Gods cannot do for Man what Man must do for himself." ~ Athena
-The Odyssey
Alright...done with PCing batch #2. I mixed Smokes traffic orange, bacon grease, and black for about half. Thought they would turn out more orange but I'm pleased with the outcome.
And wanted something different for the second half. I first mixed traffic yellow and bacon grease together. Tumbled and rolled in black afterwards in a separate Container. Didn't trip my trigger after baking so I used a Qtip with traffic orange and stuck it in the HP cavities and baked again. Gonna call it Firetiger...or T Rex color!!!
Just waiting on my .401 sizer to show and I'll load a few up to test!!!!
Last edited by Tripplebeards; 09-13-2022 at 04:37 PM.
Loaded a few up in 10mm today...
It's a color I don't plan on doing again. The ugly duckling.
Last edited by Tripplebeards; 09-15-2022 at 06:58 PM.
Posting Permissions
| BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
| BR | Bench Rest | M | Magnum | RN | Round Nose |
| BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
| C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
| HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
| PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
| LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
| GC | Gas Check |
Reply With Quote
