Powder coated bullets pics only

[Recycled bullet]

Chrome plated Elmer Keith hollow points.

[makeurownfun]

[Recycled bullet]

Heavy hollow points coated in super durable clear gloss loaded into 308 Winchester.

[novalty]

Eastwood Ford Dark Blue and Maroon.

[Pereira]

Lee 310gr 44's

Sent from my SM-G990U using Tapatalk

[gmfowler2]

Prismatic Powders Cloud White and Golden Brass II. A few Lyman 45266 boolets to test coverage.

Sent from my moto g stylus 5G (2022) using Tapatalk

[novalty]

Eastwood powders: Ford Dark Blue, Maroon, Aqua Blue, High Gloss Jet Black, Bright Signal Red, and Light Violet. “Shake n Bake,” about 1 minute of swirl without bb’s, baked for 20 mins at 400°

[D.Bullets]

[jsanch03]

What mold are those red pills?


Sent from my iPhone using Tapatalk

[D.Bullets]

Custom mold for PC (Brooks Mold)
Lee 338/230gr
5 shot group w Lee 338 @ 2385fps

[deces]

Everyone has developed their own way...there are different weather/humidity levels across America so what one PC will do on the East Coast might not work here Behind Enemy Lines (West Coast). Some use the recommended 'convection oven' and others a 'toaster oven'...the manufacturers have their recommendations for time and temperature (after the PC has melted), some do a dump in a lump/pile and bake, I like to call that method 'Production Baking' and some pick them up with nitrile gloved fingers and stand them individually to bake, still others suffering from OCD like me still tweezer them to the bake tray. Each to their own & more power to them.

I did a video of how I do them if you are interested... 'FootStompin Powder Coating Cast FWC's' ... https://www.youtube.com/watch?v=Xi2gDLxNlxQ

Obligatory picture ... 'Copper and Brass'

What PC did you use for that results of copper coloring?

[TXTad]

How are you coating only part of the bullet?

[D.Bullets]

Dipping in Liquid PC.
Instead of swirling.
My ingredients 30 grams PC of your choice 70 ml acetone, 28 or 30 ml pvc pipe cleaner (optional 2ml 99% or higher isopropyl alcohol ..Do NOT use 90%). Shake often and don’t use for 8hrs (the longer the better to ensure PC is dissolved).
I usually make a gallon at a time using empty acetone can.

Dip once and (fan dry 20 min) dry then dip again (fan 20min) dry.
Bubbling will happed while baking if not completely gassed off. Than bake to cure.


To swirl I lower the PCing powder to 20 Grams the rest is the same.

For Dipping I use Above amount. I increased the amount of PCing from 20 to 30 grams.
I dont think the amounts are all that important unless you are going for exact match from batch to batch.


Purple or clear..Purple will change PC color.
Drying and cooling Racks on a timer w/5 oven trays.

Hope this will help with questions...

[TXTad]

Dipping in Liquid PC.
Instead of swirling.
My ingredients 30 grams PC of your choice 70 ml acetone, 28 or 30 ml pvc pipe cleaner (optional 2ml 99% isopropyl alcohol). Shake often and don’t use for 8hrs (the longer the better to ensure PC is dissolved) Dip once and dry then dip again dry. Than bake to cure.
I usually make a gallon at a time using empty acetone can.

Is the "28 or 30 ml pvc pipe cleaner" this?

https://www.homedepot.com/p/Oatey-16...7953/202329481

[deces]

I think he is talking about the material of the container.

[D.Bullets]

Yes. I have used both the purple and clear.

[D.Bullets]

Is the "28 or 30 ml pvc pipe cleaner" this?

https://www.homedepot.com/p/Oatey-16...7953/202329481

Yes I have used both clear and purple (purple will add a purple color to your P.C.) with equal results Don't use the Cement

[TXTad]

Yes I have used both clear and purple with equal results Don't use the Cement

Does the purple dye affect the color of the PC?

[D.Bullets]

YES.. It will add a purple color. Use clear if you are a Packer Fan.

[atfsux]

Dipping in Liquid PC.
Instead of swirling.
My ingredients 30 grams PC of your choice 70 ml acetone, 28 or 30 ml pvc pipe cleaner (optional 2ml 99% or higher isopropyl alcohol ..Do NOT use 90%). Shake often and don’t use for 8hrs (the longer the better to ensure PC is dissolved).
I usually make a gallon at a time using empty acetone can.

Dip once and (fan dry 20 min) dry then dip again (fan 20min) dry.
Bubbling will happed while baking if not completely gassed off. Than bake to cure.


To swirl I lower the PCing powder to 20 Grams the rest is the same.

For Dipping I use Above amount. I increased the amount of PCing from 20 to 30 grams.
I dont think the amounts are all that important unless you are going for exact match from batch to batch.


Purple or clear..Purple will change PC color.
Drying and cooling Racks on a timer w/5 oven trays.

Hope this will help with questions...

How many projectiles are you processing at a time with the 30 grams of powder? How much does this coat? How many coats do you bake?