Home made auto-sizer.

[Gremlin460]

Hi Mike, I'd like to purchase part(s) to do the 308 mentioned above. I'll now be doing lots of 60g 223/556. What needs to be done on my end to accommodate that please? I'm not back all the way from hand issue yet.

Best, Arnell

I am hoping this "kit" will solve your problems as far a rifle (read long) ammo goes..
I am off to the plastics factory .... keep moving forwards!

[Gremlin460]

OK RM (rifle mod) Kit is done.. Video is being assembled and should be online in a day or two..

The kit is very simple and allows for a large range of lengths. The end user will need to customize it slightly but see the video and you will see how simple that is.

Tools required is a set of drills pref metric, a drill, Phillips screwdriver. Also a AS/2 obviously.

[Mozz]

Gremlin are you taking orders for the AS/2?

[Gremlin460]

Gremlin are you taking orders for the AS/2?

Sure, I prefer to do them in batches of 4, that way I dedicate whole days to the project. If I make them one at a time I do them between real life jobs. All that means is they take longer.I have none left atm, the last one is half way to Hatches place. But let me know what you want to do...

[Mozz]

Sure, I prefer to do them in batches of 4, that way I dedicate whole days to the project. If I make them one at a time I do them between real life jobs. All that means is they take longer.I have none left atm, the last one is half way to Hatches place. But let me know what you want to do...

I will drop you a PM later today...

[HATCH]

You got tracking?

[Gremlin460]

You got tracking?

They don't do tracking on the cheapo air service, typically takes 4-6 weeks, your in your second week. So far out of all sent none have been lost, which is a good thing.

[Smoke4320]

Mike, anybody that thinks something is "idiot proof" completely underestimates idiots.

Then someone comes along and produces a better Idiot

[HATCH]

They don't do tracking on the cheapo air service, typically takes 4-6 weeks, your in your second week. So far out of all sent none have been lost, which is a good thing.

Sorry just confused....
http://castboolits.gunloads.com/show...=1#post2845845
http://castboolits.gunloads.com/show...=1#post2845856

tracking on those shows 7 to 10 days.
Guess it doesn't matter as its gonna be chilly here for a while and to be honest its gonna just sit on the shelf for a while once it gets here

[Gremlin460]

Sorry just confused....
http://castboolits.gunloads.com/show...=1#post2845845
http://castboolits.gunloads.com/show...=1#post2845856

tracking on those shows 7 to 10 days.
Guess it doesn't matter as its gonna be chilly here for a while and to be honest its gonna just sit on the shelf for a while once it gets here

Them custom numbers, will dig yours up. Funny, you have massive freeze temps, and we are swimming in water!
Even if you not using it straight away, I still want to see it in your hands, give you something to fool with in the warm.

[jroc]

As I read post #181 I figure it will take $310.00 US for AS/2 with all 3 of original slides would get it to my door via express rowboat. Not really interested in the GM. Is that the correct price + or - a few bucks. Or have there been changes in the price since that post. Let me know, Thanks. jroc

[Gremlin460]

Went to upload a video today on the rifle conversion, not only did YouTube mute the video, but muted 2 of the other 5 that were already there!! They stated because of copyrighted music. Funny, ALL of them had the same intro... and 3 are still standing..

To say I am angry at the moment is an understatement... Now I have to remake all 3 videos because of 30 seconds worth of entry and exit track...

[Gremlin460]

As I read post #181 I figure it will take $310.00 US for AS/2 with all 3 of original slides would get it to my door via express rowboat. Not really interested in the GM. Is that the correct price + or - a few bucks. Or have there been changes in the price since that post. Let me know, Thanks. jroc

Hi jroc,

Everyone takes all the slides so I abandoned the +x method..

AS/2 all pistol calibres $240
Cheap air frieight 3-4wks $128

GM unit $181
cheap air freight $83(ish)

Rifle conversion Block & Shim set $30
postage unknown at this time.

[jroc]

Ok I'll be in touch. Thanks jroc

[Gremlin460]

I have to make another AS/2 to replace one that apparently has gone missing.
According to the several different stories I have been given, a freight container went missing in Singapore during a freight exchange between aircraft. That's what 3 out of 5 stories I got when pushing to find where my stuff is.

So yesterday I spent most of the day making another, it is now hanging and the paint is drying. AUPOST have unbelievably offered to freight this one at no charge.

I have had a rough 10 days with a funeral and all, and this really is the last thing I needed.
If anyone is waiting on something from me that has not arrived by the end of this week, PLEASE PM me and I will see to the problem straight away.

I cant shake the feeling I was lied too, but hey I will fix it.

Mike

[Redwoode]

I'd still like a rifle conversion kit after things settle down. Want the $30 now?

Best, Arnell

[Gremlin460]

Just hang on to your cash until I catch up with this disaster. Hows the hand healing?

[Redwoode]

Healing coming along ok. Strength will increase in time. Stiffness still plays havoc with dexterity when doing any small, detail work. More snow and near zero degrees again this week. Warmer weather should help.

[HATCH]

Sorry to hear about your loss mike. One hasn't showed up yet but I thing I still have a few weeks left on the slow boat

[Gremlin460]

Sorry to hear about your loss mike. One hasn't showed up yet but I thing I still have a few weeks left on the slow boat

Its not the loss so much, its the fact that it makes me look bad in the eyes of my friends and customers.
I have built you another.

I have made new rifle kits for Ken and Redwood.
They are due to go to the postal contracter this afternoon, So I have been assured they will go through the processing hub Monday morning.

I any of the first batch do finally arrive, please let me know.

Again I cannot say how sorry I am for this mess.

Mike.