Tell her you going xmas shopping.Originally Posted by pretzelxx
Tried to convince the wife to let me go to HF tonight to get drill bits, she said no.still waiting to drill out the plates on the press for the sizer to work!
|
   
   
|
|
Tell her you going xmas shopping.Tried to convince the wife to let me go to HF tonight to get drill bits, she said no.
Don't worry about life, no-one gets out alive.
Love the Holden Twin Carbs! What do they belong to?
The are going on a Holden EH Sedan with a 186, taken to 192. They are actually the correct matched pair which is quite rare to find nowadays.
Don't worry about life, no-one gets out alive.
Ken..
Yours is now finished and boxed awaiting Postage. I should have the funds cleared by Wednesday.
Hatch yours has finished the assembly and test process. Its now standing in he sun drying the first coat of paint.
Don't worry about life, no-one gets out alive.
Hopefully my bonus check will hit the bank Friday.
Don't like being hammered by the Cast Boolits Staff, then don't be a nail.
The rules are simple to follow.
Ok its sunday and finally a bit of time to sit on my butt.
Here are the latest numbers from the AusPost..
Arnell CP178536770AU
Ken CP178536196AU
Jerry CP178536205AU
and CP178536165AU
Hatch I still fooling with yours to find out if there is anything needed to do 308 long casts.. A friend from the range is going to drop me some 150g and 180g 308's in on Tuesday for me to fool with.
Don't worry about life, no-one gets out alive.
I do 240 grain 308s for 300bo
Don't like being hammered by the Cast Boolits Staff, then don't be a nail.
The rules are simple to follow.
OK, I really wish I had 6 of your casts and a sizer die, then I can make sure it works.
I haven't so we will do this the hard way.. drop one of your casts into the nose of your resizing die and let me know how much protrudes from the die.
This distance will be how high the cast is sitting when the slide tries to withdraw out of the way of the decending punch in the ram.
Or post me 6 casts and a sizing die and I will make it all work for you. The die will be returned obviously.
Don't worry about life, no-one gets out alive.
Thanks Gremlin460. Stupid me haven't looked at the posts here. I can't wait. Merry Christmas!
Our house is protected by the Good Lord and a gun and you might meet them both if you show up here not welcome son!
Thank you Ken, and thank you for the Merry Christmas, I wish the same to you and your family, and also all visitors to this thread... be safe!!..
Don't worry about life, no-one gets out alive.
grem. I have a twin stromy manifold off a HR 186S with original stromies.
Also HR disc brake front end with booster stashed up in the shed somewhere.
they worth anything nowadays??
Hooroo.
Regards, Trevor.
Australia
Yes, very much so.. you want me to put the word around, if so PM you target $ and will see what crops up.
Don't worry about life, no-one gets out alive.
Hatch thank you for the offer to lend a die and casts, that will make life much much easier on me.
I will PM address to you..
Now I can either, hold your AS/2 until I have tested it out with the die, or send it after the Xmas silliness is over and build another to test on. If I send it, you can still use it for all the pistol stuff and also short rifle.
Any changes or mods required I can send the bitz with your die when returned.
Let me know which way you want to run with this..
Mike.
Don't worry about life, no-one gets out alive.
Just hold it for now. I don't really need it so it would be another gadget on the shelf
Don't like being hammered by the Cast Boolits Staff, then don't be a nail.
The rules are simple to follow.
I bought some 308 dies of Jerrard today he is going to ship then with other stuff I ordered, saves the chance of you loosing your dies in transport either here or back to you.
Send some casts if you can 6 will do, although not up on the legalities of doing that. I have some 308 coming but they are only 180gn, still it will help with the rifle development.. somewhere you noted the length of your 240gn casts... will try and find that post.
Don't worry about life, no-one gets out alive.
Hows the GM Redwoode? I did ask in the other thread but in case you missed it.. let me know what you think..
Don't worry about life, no-one gets out alive.
Happy New year to all you guys.. hope you all busy sizing..
Don't worry about life, no-one gets out alive.
Hello all, Mike I received the GM unit today and it looks great. You did a great job on the packaging on it. I have not received the AS/2 yet. If I remember you still need the money for the GM shipping. Please let me know how much and I will send it via PayPal. Thanks for everything.
Good to hear!!. The as/2 and the GM were handed over on the same day to the contractor.. that's why the boxes say 1 of 2 and 2 of 2. Give it a day or two, if it dosen't turn up we take it further. But take heart we havemt lost one in postage yet!!
GM freight was $81.
Happy new year..
Don't worry about life, no-one gets out alive.
$81 doesn't sound too bad if it was to the USA. I have sent a few annealing machine blades over there from here and shipping has always cost more than the part does.
Posting Permissions
| BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
| BR | Bench Rest | M | Magnum | RN | Round Nose |
| BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
| C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
| HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
| PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
| LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
| GC | Gas Check |
Reply With Quote
HATCH
