Need handles for Thompson Center single cavity mold

[ghh3rd]

I received a used TC Maxi Ball mold and need handles. I think I've finally tracked down the Thompson model # for the handles (Thompson Center single cavity mold handles #732), but wondered if any other brands may work.

Thanks - Randy

[dondiego]

Lyman's work.

[ghh3rd]

For the Lyman single cavity molds?

[DLCTEX]

I use Lyman handles on mine.

[dondiego]

I just took the handles off of a Lyman single cavity mold and they fit my TC mold. I think that Lyman also makes another size for their 2 cav mold that probably would work too.

[Hardcast416taylor]

Old style Lyman single cavity. I have a set of T/C handles on one of my Lyman moulds. I discovered that they fit one day when I was getting a mold out of storage to use and the T/C handles were the first thing I got ahold of.Robert

[zuke]

Tried LEE handle's yet?

[DLCTEX]

Lee's six cavity handles may work.

[swheeler]

I use the Lyman small handles on mine.

[fatnhappy]

For the Lyman single cavity molds?

yes, single cavity lyman handles work. I have a TC mould maxi ball mould and it was clearly cut by lyman.

[357maximum]

TC and Lyman 1c handles are the same...metal wise,.... made in the same place I would bet. I personally prefer the long tapered wood on the TC versions and actively seek them out as they fit my mitts better than the stubby wood on the Lyman version.

[ghh3rd]

Seems like the TC single cavity handles are hard to come by.

[ghh3rd]

Lee's six cavity handles may work.

Bingo! Work like a charm, although that tiny mold looks a little silly hanging way out there on those long handles.

[Fishman]

Yes Lee 6 cavity handles work fine.

[triggerhappy243]

T/C stopped making handles back in 04