2 Hollywood Senior SS
2 Lyman All American Turret
1 Hollywood Universal
2 Star Progressives
Two Arbor seating presses
|
   
   
|
|
1
2
3
4-10
11-15
16-20
21-25
25+
2 Hollywood Senior SS
2 Lyman All American Turret
1 Hollywood Universal
2 Star Progressives
Two Arbor seating presses
Two Hollywood super turrets
Two Hollywood Turrets
Hollywood sr
Hollywood Jr
Hollywood ? can't remember what they call it
Two Dillon 650s
Dillon square deal
Rock chucker
Corbin
3 ponsness
There may be one or two more under the bench somewhere.
"let's go. He ain't hittin' nothin'.".... "You IDIOT, he's hit everything he's aimed at!"
Presses I use. 2-550C 2 750s 1 Super 1050 - 2 T7s. 3RCBS A2s, 1Dietmeyer 200 3 hole H press, 1 Hollywood Junior, 2 Herters for depriming 1 FA M press and an old CH Mark 4...Just got a Frankford Arsenal X-10...setting it up this weekend. Shot shell presses 4 Mec Sizemasters for load development . 2 Spolars w/Hydraulics and 2 P-W 800 +...Oh... And 1 Lyman All American turret that stays set up for 44 Russian...I do also have a very old Rock Chuck Bullet Swage press to swage bullets with...and a whole bunch I never use Sold all the real collectibles
About 15 but I don’t have them all mounted because I ran out of room on my 22 foot long bench!
A few of mine are going ro the auction this week Maybe 10 counting the Mec 600s
I think I have six. My first one was a Lee 1000 in 38 / 357 caliber. Then I decided I needed a dedicated one for 45 Colt caliber. Later still I decided I needed one in 45 ACP.
Then I got a Lee turret press 4 hole in a deal. Wow I was smitten. I got a second Lee turret press. Then a Lee single stage to load 41 Long Colt with Redding dies.
I've been loading over 40 years and may have all the stuff I need.
I could say just 1 if we are talking only about metallic cartridge loading and sticking to what we actually use.
If the count includes all loaders then I have 5. Two RCBS Rock Chuckers, two Lee progressives and one MEC 600Jr 12 gauge. I originally got the 2nd Rock Chucker so I could have duplicate setups both at my house and the farm where my parents are. But it got to be too much trouble to duplicate everything so I just put back the extra press and scale and only load at my house.
Only 5 at present. Pacific C, Bonanza Co-Ax, Dillon 550b, Dillon SDB, and Ponsnes Warren 375. The Pacific hasn't been used in about 30 years, when I bought the 550b. I had a Huntington hand press for several hears, but seldom used it.
NRA Endowment Life Member
Five presses, 2 set up for use.
Dillon 550, Forester, Lee Classic Cast, small RCBS, and a Lee hand press. The Lee CC has never been used.
2 and a half years latter and I've added more than my original postOriginally Posted by BIGOX
Mec 600jr mk5 in 28
Mec 600jr mk5 in 410
Mec 600jr 85 in 20
Mec 600jr in 10 (needs a size ring) newest
2 Mec 650 in 12
Mec Sizemaster in 12
MEC grabber in 12 (but it's totally broken down)
Texen LT 12 (new so I don't want to use it)
CH c press (like new so I don't use)
And another Lee classic. Looking to add a mec supersizer in 410 or 20.
Just the 2, an RCBS JR3 and a Dillon RL550B. With the two it does the trick.
45_Colt
I have 8 I believe, but none of them get used nearly enough anymore.
An RCBS single stage.
A Lee single stage.
A Dillon SDB.
i have 6 or 7. was going to start getting rid of some. however a friend called me a couple days ago about a Hollywood at a flea/tique store. wend and bought a Hollywood senior for $125.00. i couldn't pass it up. i already have 1 hollywood senior. this one is full of dried grease and oil and light rust. it is now apart,old paint stripped, light rust removed and parts ready to polish and repaint. what fun!
LEE Single Stage (go to most times don`t have a ton of time) 2nd is a LEE 3 hole turret, I started on LEE saw no reason to jump ship. Has Served me faithfully
Not doing much reloading currently, but over the years have picked up the following presses used:
RCBS Rockchucker
Lyman All American turret
Lyman Junior (need to clean it up and use it!)
Lee single stage
Herter's ( #3 I believe )
Just starting shotgun:
Mec Sizemaster 12 ga.
Mec 600 Jr. 20 ga.
Reddings #16 in 16 ga.
Pacific 155 DL in 20 ga.
At last count I have 9. Started with an RCBS hr 60 years ago, Got a Rock chucker with a piggyback setup, than a lyman AA turret, than a 1 station and 4 station C&H "H" press, next was a Dunbar and than I discovered Holleywood. I have a steel Senior shorty and a steel Tallboy. Time to unload some of the earlier ones so I can stick with the Hollywoods. I may have a 3position Hollywood in a week or so.
I have: Dillion 550, Dillion 650, Redding single stage, 5 Pacific 336’s and a 20 gauge MEC.
"The only way to deal with an unfree world is to become so absolutely free that your very existence is an act of rebellion."
- Albert Camus -
+1 after today...picking up a used pacific 007 for $40....don't need it but couldn't pass it up.
“I won't be wronged. I won't be insulted. I won't be laid a hand on. I don't do these things to other people and I require the same from them." the duke
Old Lee progressive
RCBS RS2
RCBS Rock Chucker
Dillion 650
MEC 9000, 12ga
MEC 600 82-85 20ga
MEC 600 MK5 .410
MEC 650 Pre 82 28ga
RECO Walnut Hill
RECO Hydraulic
Posting Permissions
| BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
| BR | Bench Rest | M | Magnum | RN | Round Nose |
| BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
| C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
| HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
| PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
| LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
| GC | Gas Check |
Reply With Quote