Here is an article from Accurateshooter.com
http://bulletin.accurateshooter.com/...-in-the-field/
Here is an article from Accurateshooter.com
http://bulletin.accurateshooter.com/...-in-the-field/
Here is an article from Accurateshooter.com
http://bulletin.accurateshooter.com/...-in-the-field/
Flipping the bolts would make them Knee Hazards. You might think about getting shorter bolts, adding "wood" or "Fender" washers on the head end under the bench to reduce the possibility of the heads pulling into the bench plank, and using Acorn nuts to cover the ends. Make a much nicer looking installation.
Best Regards,
Chev. William
I no longer use bolts. I super glued the press to the bench...
I know. I feel bad about removing the bolts since they were obviously the most important things in this thread. I had to...you know...for the children.
I am afraid you have effectively unofficially killed this thread sir. lol
Hello, I am new to this forum, and as a matter of fact this is my first post. I think the press is absolutely gorgeous. I want one, no doubt, with or without the bolts. I served for 24 years in the U.S. Navy, so the color scheme suits me to a "T" as I am a patriotic SOB.
Cabelas has them in stock, and welcome aboard!!
Last edited by Love Life; 11-15-2013 at 12:00 PM.
Love Life,
We'll know that you're really dedicated when you post that you've super glued yourself to that bench!
LOL,
TJ
http://www.flickr.com/photos/9723016...7634006315246/
The Hornady LNL bushing conversion works in the Summit and Ultramag.
I have sent off templates to Pat for a Rock Dock on the Summit and Champion press.
take care
r1kk1
Too bad about the superglue. Coudn't ya just cover 'em with some pieces of old heater hose? That would satisfy even the most shadetree among us.
David
Sometimes life taps you on the shoulder and reminds you it's a one way street. Jim Morris
I put the bolts back in....
...Just to keep the thread running!
Wayne the Shrink
There is no 'right' that requires me to work for you or you to work for me!
I used the short handle just fine for FL sizing .243 brass, but the long handle is much better for 8X57 brass. I also completely disassembled the press and used Lucas Red and Tacky #2 grease to lube everything. The press is now whisper quiet and ultra smooth.
We should take up a collection and get LL some proper bolts!
(Nice press BTW!!)
Three 44s
The Hornady LNL converter bushings works in the Summit! Have ordered the short handle kit. Amazing how you can set this press up to be so sensitive to bullet seating.
Take care
r1kk1
Man why did I have to look at this thread..... Cabela's Still has the Red, White and Blue in Stock... Free shipping and RCBS Rebate... I am a sucker for free shipping and rebates...
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |