You all got that wrong its a wildcat load and it still needs to be fire formed!!
You all got that wrong its a wildcat load and it still needs to be fire formed!!
Lead, it's what killed dinner
Rick
For a really good bang, just heat it up with a torch until it flows into the brass
Nice Marty Nice!!!!
Lead, it's what killed dinner
Rick
Wheel weight are for big bore cannons one cannon 2lbs black powder usecan as wad then insert wheel weights point tward Iran and fire.
You boys got it wrong. Probably work better if he had a Dillon 1050 press with the automatic bullet feeder. That Lee Press single stage is to slow.
Take Care
Bob
Its been months since I bought the book, "How to scam people online". It still has not arrived yet!
"If the human population held hands around the equator, a significant portion of them would drown"
Is that one of them bullits that shoots around corners???
Looks to me your mould might need replacing. Casting a little out of spec are we? That is pretty good.
My firearms review site. http://rangehot.com/
Took me awhile to figure out, I live North of the Border, but what he is really doing here is swaging his own bullets out fo wheelweights using the case as a jacket. Am I close?
Take Care
Bob
Its been months since I bought the book, "How to scam people online". It still has not arrived yet!
"If the human population held hands around the equator, a significant portion of them would drown"
Funny you should you mention that Bob, I spoke with a friend of mine today who works at a race car shop about giving me old lead weights they use in transfering the center of gravity in round track cars . He told me they make their own from lead they get from the local pistol range, melted down and molded into weights and I can have their old ones. Talking about recycling, from weights to bullets back to weights then to bullets who knows how many times.
My firearms review site. http://rangehot.com/
Uh, you may want to do the following in order:
Slug your bore
Slug your cylinder throats
Slug yourself
if that dosen't work, disassemble your sizing die and clean and polish all surfaces thoroughly.
Have you considered neck sizing?
I'm woncering if anyone has seen a "go" gage to match.
Please use a magnum primer!
I can't stop I'm laughing too hard to eat my leftover bird sandwich.
Best post I've seen in a while!
Is That Really A Wheelweight???? Way Too Shiney And Clean Don't Look Atoll Like The Ones I Get. Needs An Investigation To See Just Whuts Goin' On!!!!!!!!!!!!!!! May Be A Silver Vampire Boolit?
I saw his problem right off, he forgot to take off the clip. Boy some people. LOL.
Steve E...........
I thought that was a boomerang bullet. Shoot it and it returns back to you to be recycled.
Ya gotta melt 'em first?
Now I don't care who you are that's funny!
Larry the cableguy
thats really funny... do you think it will fit in my 223 rounds?
might have a boomarang action and whip back around. Be careful!
A Democrat that owns Guns is like a Vegan that owns Cats...
C2N14... because life is not energetic enough.
Gott und Gewehr mit uns!...
Death is only The End if you assume the Story is about You.
1.618034 Fnord
מנא, מנא, תקל, ופרסין - Daniel 5:25-28 - Got 7.62?
Well, when all else fails, use what hospitals use-- K.Y. yelly. HarHar!!
when in doubt, back up, take a break, can't hurt!!
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |