MidSouth Shooters SupplySnyders JerkyRotoMetals2Reloading Everything
Titan ReloadingRepackboxInline FabricationLee Precision
Wideners Load Data
Results 1 to 3 of 3

Thread: some chrono readins and eating a little crow.

  1. #1
    Banned








    Join Date
    Mar 2005
    Location
    munising Michigan
    Posts
    17,725

    some chrono readins and eating a little crow.

    Ive got 3 new guns ive been working up loads with and found a good accurate load and took the chrono out to check them. A 300 ultra 26 inch barreled bdl. A 24 inch barreled 300 H&H classic and an abolt 22 inch 300 wsm. Ive allways been one that preached the short mag **** was well, just that **** but the chrono doesnt lie. the 300 h&h and the wsm were loaded with 4350 to the point i got pressure signs and then backed off one grain of powder. I wont list the load as its at least with the h&h well over listed data. Both were loaded with 150 hornady sst tipped bullets. Average for 5 shots put the H&H at 3125 and the wsm at 3185 so i got 60 more fps out of a 2 inch shorter barrel. Got to be something to the short mag ****. the ultra was loaded with 97 grains of re25 and a 168 tssx. Never had any pressure signs but that load shot so good i stopped there. It went 3425 for an average so dont let anyone fool you into thinking its a waste of powder. You arent getting to that level with any of the smaller 300s and id save that 250-300 fps with a 18 grain heavier bullet is a big step up in horse power. Ill add too that theres probably a bit more to be had if I wanted to take the time.

  2. #2
    Boolit Grand Master


    Larry Gibson's Avatar
    Join Date
    Jul 2005
    Location
    Lake Havasu City, Arizona
    Posts
    21,347
    Lloyd

    What the WSMs have is more effective barrel lengths (the interior). The 300 WSM has close to 1" more effective barrel length that the 300 Win Mag or the 300 H&H in the same length barrels. In a magnum cartridge with slower powders that can equate to 50+ fps more velocity. Additionally the minimal tapered 300 WSM may very well be loaded to higher psi before it gives psi signs than with the heavily tapered 300 H&H case. When loaded to the same psi with the same effective barrel lengths there really isn't much difference between the WSMs and magnum cartridges of equal case capacity.

    Just pointing out some things and not disagreeing with you at all. "Got to be something to the short mag" is correct in that you can get the same magnum level performance with a shorter over all length barrel. To some a 2" shorter barrel is meaningful and that's a good thing.

    Larry Gibson
    Last edited by Larry Gibson; 05-25-2013 at 06:21 PM. Reason: spelling corrections

  3. #3
    Banned








    Join Date
    Mar 2005
    Location
    munising Michigan
    Posts
    17,725
    never thought of the extra inch you gain with a short action round. Makes alot of sense.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check