Here is what I cast today!
It's from NOE, his 358 135gr 9MM mould. I got a 5C and it rocks!
He may have some for sale, check it out!
Here is what I cast today!
It's from NOE, his 358 135gr 9MM mould. I got a 5C and it rocks!
He may have some for sale, check it out!
Last edited by Blammer; 03-02-2013 at 10:24 PM.
Looks good. What alloy?
At one with the gun.
another casting session today with the same mould.
I now have approx 500 of them rascals, sized and lubed.
I think I have a good start.
Was looking at bluedot 5.5gr, tried a few, it cycled them fine and the cases dropped right at my feet. May go up to 5.7gr.
Is this the same we have on GB's now? Looks awfully sweet. WOW.
One of my father's favorite statements: "If I say a chicken dips snuff, look under his wing for the snuffbox" How I was raised, who I am.
no actually it is not the same one on the GB.
this one
http://noebulletmolds.com/NV/product...roducts_id=334
Blammer what size are they dropping at?
I'm looking to pick up a 9mm mold for a buddy and this is intriguing.
I need to slug his barrel. We're going to poly lube so this might be too big. I wanted to avoid sizing.
Thanks!
Try any Red Dot? Nice lookin Boolits Blammer! Sure would like to know what they do through a chrony with the 5.7gr of BD.
I just cast another 300 of them yesterday...
they drop at .358 dia and sorry havn't chronied any.
actually I haven't chrony'd anything at all in the last year. May have to break it out an see.
I know the Chrony is a PITA. It seems like it takes up a LOT of shooting time setting up and taking down and if the range is busy I spend a lot of time letting others shoot through it to satisfy their curiosity.
For some boolits though the data would be worth the trouble, and this is one of those times. I have the same mold so If I get some cast/loaded/tested I'll share the results with ya. Sure is a fine looking boolit!!
Glad to hear you had good results...I just ordered what appears to be this same design in an RG4
Them thar is some nice lookin' boolits, Blammer. Looks like professional. BC
Jesus said, "I am the way, the truth, and the life: no man cometh unto the Father but by me."
Well i get thia mold in litle difrent bullet design! I cast some ,its litle different from molds i usually use (MP and Lee) but it cast nice boolits.And i really like the design of this 9 mm! But...when i try to reload some i notice that i need to have COL of 1.09 inch to provide that lube grove is inside the case and i need to seat at COL 1.07 to provide that bullet dont hit the rifling of my 75SP01 when chambered.This COLs ar way under my standard and i don't feel comfortable whit this COL. Whats Yours COL with this bullet,Blammer!?
not sure, I don't really harp on COL I try a few and if I need to seat them a bit deeper to function I do.
I measured mine just now and they are 1.070 and I shoot a bunch of them.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |