(#25) change mine to 4 cav, 2 PB and 2 GC, no HP
|
   
   
|
|
(#25) change mine to 4 cav, 2 PB and 2 GC, no HP
Please put me down for a .311, 5-cavity, all GC. Have several .30 cal. rifles (a number of them old M99s, no mystery there) that are just waiting for this boolit.
Thanks,
Jess
Last edited by M99SavNut; 07-01-2012 at 08:12 PM. Reason: Cast is a 2nd language to me - used "bullet" by mistake - and added some potential applications......
Updated list
Bump
Thanks for the orders
Swede Nelson
The expectation of evil is more bitter than the suffering -OR-
More people die from worrying about getting ate by a bear then get ate by a bear.
I am casting for four Springfield 1903s and a newly aquired Mosin Magant 91/30.
I have made soft lead casts of the barrel and throat of each rifle. My current molds will fill the ball seat with no problem. But the ogive shows no sign of touching the throat when the front drive band is into the lands. The long nose portion just hangs out there unsupported.
I've done a lot of experimenting this past week with Beagled moulds. Looks like the nose of this bullet should fit snugly on top of the lands just in front of the leade. One or maybe two drive bands should fit against the throat for support. And, the back of the bullet should seal the barrel.
Sounds like "just the ticket".
I've been playing with some test samples and I'm convinced!
Please put me down for a .311 4 cavity all GC
Thanks.
Last edited by NTD; 07-23-2012 at 12:11 PM.
I sold my rifle so I will have to withdraw from this group buy. Please remove my name from the list (#21).
Duett
I'll take a 4 cavity .311 2PB - 2GC
Put me down for a 3 cav GC drilled for probe.
Update list
Bump
Thanks for the orders
Swede Nelson
The expectation of evil is more bitter than the suffering -OR-
More people die from worrying about getting ate by a bear then get ate by a bear.
Al
Can i get a 3 cavity all GC please in .316
Thanks
Cheers
no34570
"I'll tell you what rule we applied sir,We applied rule 3-0-3, We caught them and we shot them, under rule 3-0-3." :Lt Harry " Breaker" Morant at his court martial in January 1902.
Count me in for a .311 GC 2 cavity mold if this buy is still open.
Thank you.
Hey Fellas
I ordered a .316 mould,for my .303 British rifles,but i also want to use this in my Mosin,which is around the .312-.313 mark,can I size it down with no problems?
don't want to have to fork out for another mould in this design,help!
Cheers
no34570
"I'll tell you what rule we applied sir,We applied rule 3-0-3, We caught them and we shot them, under rule 3-0-3." :Lt Harry " Breaker" Morant at his court martial in January 1902.
Yes it will size down OK. If I am sizing down more than a couple of thou then I like to lube the boolit first in a die just over cast size and then resize.
Helps keep the integrity of the lube groove(s).
For fine firearms and shooting requisites visit my Web Site by clicking the link below:
Pukka Bundhooks
Thanks DromiaOriginally Posted by dromia
I was not sure if I could.
Cheers
no34570
"I'll tell you what rule we applied sir,We applied rule 3-0-3, We caught them and we shot them, under rule 3-0-3." :Lt Harry " Breaker" Morant at his court martial in January 1902.
Al
My order for this should be .316 please,not .311,sorry
Can you also drill for probe please?
Thanks
Cheers
no34570
"I'll tell you what rule we applied sir,We applied rule 3-0-3, We caught them and we shot them, under rule 3-0-3." :Lt Harry " Breaker" Morant at his court martial in January 1902.
Ok, I'll go in on this one..
A 4 cav PB on the .311" measurement..
I'm interested in this boolit for one or both of my .308 bolt rifles. Why do the bands taper progressively toward the base?
As I take it, they taper like that for firearms with short throats.. so you can still use this bullet if you have to seat them longer..
Single cav GC w/HP, .314 bands.
Last edited by madsenshooter; 08-26-2012 at 02:59 PM.
"If people let the government decide what foods they eat and what medicines they take, their bodies will soon be in as sorry a state as are the souls of those who live under tyranny."
-Thomas Jefferson
Swede,
Please add a 2 cavity @ .311 for me. I know this design is very good in a lot of 30 cal. rifles. Thanks,
Edd
Charter member Michigan liars club!
"The strongest reason for the people to retain the right to keep and bear arms is, as a last resort, to protect themselves against tyranny in Government." -- Thomas Jefferson
"Consider the clown(s) just one of God's little nettles in the woods, don't let it detract from the beauty. Sooner or latter you are going to run into the nettles regardless of how careful you are."
Beware of man who types much, but says nothing.
Posting Permissions
| BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
| BR | Bench Rest | M | Magnum | RN | Round Nose |
| BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
| C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
| HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
| PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
| LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
| GC | Gas Check |
Reply With Quote
