NOE 311 165Gr. RF (RD) Re-run

[SwedeNelson]

NOE 311 165Gr. RF (RD) Re-run
THIS BUY IS CLOSED




We will offer this bullet in .311", .314", .316" diameters.
One size per block. (No mixing diameter)

This buy is on the schedule.
We will keep the buy open until 2 or 3 weeks before the date on the schedule.
At that time we will close the buy and send out a PM with
a request for payment. We don’t require payment before then.

Prices will be as follows:
Single cavity mould $68.00 Ea.
Double cavity mould $72.00 Ea.
Three cavity mould $79.00 Ea.
Four cavity mould $85.00 Ea.
Five cavity mould $92.00 Ea.
Plus $10.00 Shipping/Handling.
Foreign orders are a additional $10.00 Shipping/Handling.
Prices are subject to change at any time.

You can mix number of cavities in an order to make 5.
We will offer PB and GC on this bullet.

Use LEE Commercial 6-Cavity handles (not included).
Lyman, RCBS type top punch furnished with each mould
as well as a sample of Bull Plate sprue plate lube.
Moulds are machined from 2024 Aluminum
Used for high strength structural and aircraft applications.
Tensile strength range 30,000 to 63,000 psi
Sprue plate (blued), alignment pins, and hardware will be
carbon steel.

Hollow pointing one cavity and furnishing a double
ended pin would be $35.00 Extra.

We will accept Checks, Money Orders and Pay-Pal
Pay-Pal requires a 3% sir-charge.
Pay-Pal account:
pbsco1@qwestoffice.net
Make checks and money orders out to:
NOE Bullet Moulds

Our mailing address is:
NOE Bullet Moulds
1645 W 150 N
Provo, Utah 84601
801 377-7289


Thank you for your interest in this buy.
Swede Nelson

[SwedeNelson]

List of orders
1 Suo Gan 4 cavity PB .311
2 DragoonDrake 4 cavity 4GC .314
3 DragoonDrake 4 cavity 4PB .314
4 shawnsmc 3 cavity GC w/HP .311
5 shawnsmc 2 cavity GC .314
*6 Hickory 2 cavity GC .311
7 blaser.306 5 cavity PB .311 drill for probe
*8 shedhunter 3 cavity GC w/HP .311
9 SSGOldfart 3 cavity GC w/HP .311
*10 69papatango 3 cavity GC w/HP .311
11 bkhamlin 3 cavity GC w/HP .311
*12 Chuck4570 5 cavity GC .314
*13 Bob Maerdian 4 cavity 2GC 2PB .311
*14 tbhutton 5 cavity GC .311
*15 Echo 4 cavity GC .311
*16 BeauCassidy 2 cavity GC w/HP .311
*17 AnthonyB 2 cavity GC w/HP & extra HP pin .311
*18 Dutch4122 5 cavity GC .311
*19 Hamish 3 cavity 1GC 2PB .316
20 Idaho Sharpshooter 4 cavity GC .311 drill for probe
*21 shangrila 4 cavity GC w/2HP .311
*22 Jim Flinchbaugh 3 cavity GC .314
*23 GL49 5 cavity GC .311
*24 gabbyM 4 cavity GC .311
*25 yobohadi 5 cavity 2GC 3PB .311 drill for probe
*26 1longshot 5 cavity PB .311
*27 Lefty SRH 4 cavity GC .311
*28 StratsMan 4 cavity GC .311
29 rjathon 4 cavity GC drill for probe
*30 BRobertson 3 cavity GC .311 drill for probe
*31 338RemUltraMag 5 cavity GC .311
*32 MUSTANG 5 cavity GC w/HP .311
*33 no34570 2 cavity GC .316
*34 no34570 2 cavity GC .311
*35 badgeredd 3 cavity GC .311
*36 jethunter 4 cavity GC .311 drill for probe
*37 Leonidas 4 cavity GC w/HP .311
*38 19112TAP 3 cavity GC w/HP .311
*39 NYBushBro 4 cavity GC .311 drill for probe
*40 FLYCUTTER 5 cavity GC w/HP .311 drill for probe
*41 Dobetown 2 cavity GC .311
*42 Eastwood 4 cavity GC .311
*43 Longone 5 cavity 4GC 1PB .311
*44 12DMAX 2 cavity GC .311
*45 bdicki 3 cavity GC .311
*46 GSCSA 2 cavity GC .311
*47 sixgunner452 2 cavity 1GC 1PB .311
*48 blueeyephil 4 cavity 2GC 2PB .311
*49 dgslyr 2 cavity GC .311
*50 Hivelicity 2 cavity 2GC w/HP .311
*51 Paulinski 3 cavity GC .311
*52 chrisw 2 cavity GC w/HP extra pin .311 drill for probe
*53 RickinTN 3 cavity GC w/HP .311
*54 rking22 4 cavity GC .311
*55 Woodtroll 2 cavity GC .311
*56 colt1960 5 cavity GC .311
*57 turmech 4 cavity 2GC 2PB .311 drill for probe
58 Slag 3 cavity GC w/HP .311
*59 thegreatdane 4 cavity GC .311
*60 Doc65 4 cavity GC .311
*61 TNsailorman 3 cavity GC .311
62
63
64
65

(*) = Paid

Thanks
Swede Nelson

[Suo Gan]

Al, give me a plainbase 4 cavity at 0.311" and maybe another in 0.316"

Thanks for running this one again!

[DragoonDrake]

I would like one .311" mold. 5 cavity: 3gc/2pb

[shawnsmc]

Can I get a 3 cavity GC with one cavity HP'ed

Thanks,
Shawn

[no34570]

Al
I will take a 3 cavity,all GC please in .314 diameter + HP and drill for probe please
TIA

[blaser.306]

I should have done it in the first place , Might as well sign me up for a 5 holer .311 diam plain base and drill it for the "probe" Thanks .

[SwedeNelson]

Updated list
Bump

Swede Nelson

[Aaron]

Swede

Are you doing RG molds on this?

Thanks

Aaron

[shawnsmc]

Can I get a 3 cavity GC with one cavity HP'ed

Thanks,
Shawn

Sorry forgot to specify diameter. I would like it in. 311 please.
Thanks,
Shawn

[tbhutton]

Hi -

It will be three weeks before I can slug the barrel on my 336SS to determine the appropriate size. Will the buy still be available then? I can pay, but I don't know what size to specify.

Thanks,
Tom

[Piedmont]

What will the diameter be on the three diameters on the nose in front of the crimp groove?

[Suo Gan]

Hi -

It will be three weeks before I can slug the barrel on my 336SS to determine the appropriate size. Will the buy still be available then? I can pay, but I don't know what size to specify.

Thanks,
Tom

There is going to be several months before this mold gets cut.

[DragoonDrake]

I am going to kindly change my order. Can I have two molds, both 4-cavity. One plainbase and one gas check.

Thanks

[SwedeNelson]

Aaron
Sorry, no RG's on this one.
HP cavity would be a bear to get to work.

tbhutton
You have plenty of time.

Piedmont
There is a .050 long diameter just above the crimp
groove that is the same diameter as the body.


Thanks
Swede Nelson

[Shedhunter]

I'll take a 3 cavity, .311 all gas checked with one HP cavity.

This is my first time ordering but I think that is right.

[SSGOldfart]

So Swede Nelson what's our target date for this GB?I need the same as shedhunter
I'll take a 3 cavity, .311 all gas checked with one HP cavity.

[69papatango]

Can I get a .311,3 cavity GC with one cavity HP'd.

First Custom mold

ps. what does (drill for probe) mean? Is that the same meaning as Hollowpoint?

[blaser.306]

Drill for probe = ( DFP ). NOE also sells a digital mould block thermometer that monitors the operating temp of the blocks as you cast , And the probe mounts into the hole . If this is your first and likely not last noe buy you will not be dissapointed.

[69papatango]

Drill for probe = ( DFP ). NOE also sells a digital mould block thermometer that monitors the operating temp of the blocks as you cast , And the probe mounts into the hole . If this is your first and likely not last noe buy you will not be dissapointed.

AH...Thanks for the info.