A decent score today:
A large pitcher, 10 inches tall, 5 inches diameter on the fat part, 1 pound 6.4 ounces.
An 11.5 x 7 inch tray, 12.5 ounces.
And what looks like 10 inch shallow footed bowl that someone smashed flat into some sort of plate, just over a pound.
Hallmarks from the above, in order, pitcher, tray and flattened bowl.
Last edited by imashooter2; 10-11-2015 at 11:14 PM.
It's been a good couple weeks...
No new hallmarks, but thought I'd post some weights to help my fellow scroungers. The coffee pots with the rattan handles are about 1.5 pounds. The teapots are a little over a pound. The fat coffee pot is 1.75 pounds. The 11 inch tray is 1.5 pounds. The small creamer and sugar on the tray are just 3 ounces each. The larger creamers and sugars, the Revere bowls and the square candy dish are all between 6 and 8 ounces except the covered creamer on the right. That one is Woodbury, which over time I've found is heavier construction than most pieces. It goes 10 ounces. The large porringer is just over a pound and the small one 10 ounces.
Some closer pictures:
Last edited by imashooter2; 10-11-2015 at 11:16 PM.
Just luck of the draw... I live right around the corner from an affluent college town with an aging population. All that holloware that an upscale 50's homemaker had to have holds no interest to their kids when it's time to settle their estates.
Found my first score today since I started looking a couple months ago. Got a 6 5/8 oz candle-stick holder mark "Woodbury Pewterers" for $.25 and a small 7 3/4 oz TIN pitcher for $.50. I was a bit skeptical that the pitcher was tin but the base & handle are both soldered on, there is a small roll-mark on the bottom that says "H K, TIN". It is very flexible/bendable even though it's a bit thicker. I'm going to say it is certainly close to pure tin.
Another week, a few more pieces and a couple of new hallmarks...
A footed 6 inch bowl, 10.5 ounces:
A pair of 5 inch bowls, left hand is 7.5 ounces, the footed bowl on the right is 8.2 ounces:
A shallow 9 inch bowl at 14.5 ounces:
And finally a short candlestick (7.8 ounces) and a solid bottom mug (13.2 ounces):
Last edited by imashooter2; 10-11-2015 at 11:18 PM.
Before you melt that pewter item in GOOD condition you may want to look at this site.........
http://www.pewtersellers.com/
I think some pewter is very valuable.
LOL! I'm starting to get that post once a page. Some antique pewter is very valuable. Modern stuff is not. Everything you see here is modern pewter that I got cheap because there isn't any real market for it.
I would agree, imashooter2, just putting it out there so people will be watchful for unique pieces or pieces that look very old. Of course it goes without saying that if it has a 1800's date on it you may want to look up the value. I think the value of pewter in PA is going to rise over time.........cause it keeps disappearing.
Thanks for the addition! Are the brass pieces (assume it's brass anyway) inserts or plated onto the pewter?
The rings around the vase are plated but the emblem was attached with some sort of adhesive. It is soft and malleable appears to be brass.
Question for the pewter guru (imashooter2)....thanks in advance!!!
Can I assume that if the word pewter is stamped on the bottom that it is actually pewter? Or can fakes be found with this stamp? Was at scrap metal yard today and may have found 30-40 lbs at a very good price!!!! Cheers Peter
Anything can be faked, but I've never seen an item stamped simply "pewter" or "genuine pewter" which was not. Beware of pieces stamped "Mexican Pewter," "Pewterx," "Pewter Finish" "and the like. Always look for the genuine pewter form traits... thin bodies, soldered attachments, no casting lines.
Another classic 5 inch glass bottom tankard. 13.9 ounces as it sits, should net 10.5 - 11. A new hallmark on this one, but it does have the standard "English Pewter" and "Made in England" that I see on most of the glass bottom specimens. Pardon the mouse pad reflection.
Last edited by imashooter2; 10-11-2015 at 11:19 PM.
I think most of the scrap tin in this thread is pretty darn ugly. I don't understand why anyone would want to drink their beer from a tin tankard when it already comes perfectly prepackaged in an icy cold can. Empty cans also make a nice target for much prettier boolits, it's win win
Anyhow, on topic and before it gets sent down range, here's some pics for posterity from my recent scrounging.
The first two are Aussie manufacturers, the larger one Huntly by Silcraft in Melbourne, the middle one says Kirra and I'm guessing by the name and boomerang in the hallmark it's Aussie too, the last smaller one is Selangor-Pewter Malaysia-Singapore.
Last edited by Full Mold Jack; 06-12-2013 at 03:13 AM. Reason: my backwards syntax
zidave, maybe I have no soul, but other people's 40 year old bowling trophies go in the pot.
Full Mold Jack, thanks for the additions!
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |