Question.
There are at least 25 people that have expresses an interest in this mold.
Now what will it take to make it fly?
Question.
There are at least 25 people that have expresses an interest in this mold.
Now what will it take to make it fly?
selpaw , added you to the list.
Wots, the answer is ultimately whenever Miha is gives it a green light. I've sent him a PM to see if he can give us an update.
Last edited by Dannix; 10-08-2011 at 09:11 PM.
I'd go for a 4 cav HP. If that cavity count is a sticking point, then a 2 cav HP.
3 sets of pins. 1 x penta, 1 x round, and 1 x either (I'll grind flat and polish for casting solids. I know I can flip them, but dedicated solid pins would let the mold rest flat on the hotplate)
we have some new news? much interest has to be to make a remittance?
Iron Mike Golf, added you to the list.
No new news. Just waiting for a break in Miha's schedule. Interest remains, patience prevails.
I'm going to overhaul this list and flesh it out with the specifics of the requests and purge any non-confirmed on the list. Probably this weekend.
I'm interested.
Interest / Commitment post updated and fleshed out. Please let me know if you see any errors.
gefiltephish, added you as interested.
because I'm going to need another mold like mine, because a friend wants one just for him. jealousy. Thank you.
Last edited by el general; 10-22-2011 at 09:06 AM.
Ok. Thank you so muchˇˇ
Just a bump to the top, with some bait for those who haven't joined...
I believe these are results from the previous 2 cav GB:
and an example of the art we long to own, only ours will be 4 cavity:
That's right pretty!
I am interested, please put me on the list
4C, HP, plain base, penta and round pins, .359", j3526134 at telus dot net
EDIT: Added the rest of the info
Last edited by jethunter; 11-16-2011 at 12:00 AM.
If anyone has the link handy to the thread with the specs for this mold I would greatly appreciate it.
I have been searching, but to no avail...probably hiding under my nose.
Well, this is what I've found for ya so far, but no real specs.
http://castboolits.gunloads.com/show...19&postcount=1
How about this one
http://castboolits.gunloads.com/show...hlight=9mm+125
This probably won't help much either. You could pm Mihec.
http://www.mp-molds.com/shopping/pgm...php?id=16&=SID
Last edited by gefiltephish; 11-02-2011 at 09:24 PM.
I'm interested in a125 gr.plain base,h.p., with round pins only.In .358,2 or 4 cavity.
Last edited by huntnman; 11-10-2011 at 09:25 PM. Reason: add dia.desired boolit.cavity preferance.
OK guys, it's time to clean up the list.
Please specify the following if you have not already done so. We particuarlly need email addresses listed.
- # of Cavities
- Plain Based or Gas Check
- HP or Solid
- Round Pins Only, Round + Penta, or Round + Penta + Solid (for HP Moulds)
- Desired diameter
- Your email address (obfuscated to avoid spambots). Example: my[removethispart]address[at]gmail(dot)c0m
Defaults, if not specified:
- 4 Cavity
- Plain Based
- HP
- Round Pins Only
- .359 Diameter
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |