It is now time to post this here as im coming to a close on the project. First off about the round, its call the 700 ***. it got its name from the members here. i posted a pic of the round in chat and the first response was "***" so it stuck. the case is made by fire forming 50 bmg brass to the chamber and then trimming to 3" long. then press it into a neck sizer and seat a .700 cal 1132gr cast paper patch boolit. according to my numbers this gun with its 16.25" barrel will push that 1132gr boolit to over 2000fps and up to around 2300fps. The gun is made by me from scratch and weighs in at 15lbs. its a single shot with a shell holder bolt. the optic is an Aimpoint comp M4 and handles the recoil like a champ. the grip is a magpull grip made for an AR and the recoil pad is a limb saver. so enough talk here are the pictures.
here is a picture of a loaded round
here is an overall picture of the gun and some ammo
The scope rail that i had on the run would not handle the recoil and was smashing agenst the lug on the scope base. so i had to rethink how to attach the scope. and this is what i made to solve the problem.
and last nite i got her all painted up and she is ready to go stalk some antelope now
And i took it with me to BBPDS last weekend and we all had fun shooting it. these where semi mild loads as this thing can be loaded up real nasty. here is a compiled video i did of the shooting.
http://www.youtube.com/watch?v=kFYXTH7Gdhk