Going to push the envelope on dumb questions here. Could a Lee .379 boolit be sized to .359-.360 to use in a 35 Rem? And would a Marlin MG have enough twist to stabilize a 250 grainer?
Going to push the envelope on dumb questions here. Could a Lee .379 boolit be sized to .359-.360 to use in a 35 Rem? And would a Marlin MG have enough twist to stabilize a 250 grainer?
"Some times it's just better to smile an walk away."
-161
"Think ya used enough dynamite there, Butch?"
-Butch Cassidy & the Sun-dance Kid
If you lube the boolit and then run it through a 358 sizer, It might work, sort of. The better option is to go to one of the custom mold makers and buy a 35-250. The only way I'd try this stunt is to run the boolits through a Lee sizer.
thats pretty dang far.
i think you'd end up really work softening the alloy, bending the g/c waay outta shape,
and smearing even a filled lube groove to near nothingness.
Got a new mold on the way. 190 grain, 359 gascheck from Ranch Dog. Gonna add it to the inventory.
PM or email for more details.
Jerry
Carolina Cast Bullets
Growing old is mandatory, growing up is optional ! ! !
Got a new mold on the way. 190 grain, 359 gascheck from Ranch Dog. Gonna add it to the inventory.
I'll remember that. I thought about ordering a RD for the 35 Rem but don't know how much I'll shoot it. I ordered 100 Beartooth 200 gr. yesterday. I didn't think I could size .375 to .359 but thought I'd ask.
Thanks for the replies.
"Some times it's just better to smile an walk away."
-161
"Think ya used enough dynamite there, Butch?"
-Butch Cassidy & the Sun-dance Kid
http://brp.castpics.net/R1.html
BRP has a couple of .35's
http://www.castpics.net/subsite/CurMolds/NEI.pdf
NEI has a couple of good looking heavy molds available in .35 cal.
http://www.castpics.net/subsite/CurMolds/default.html
Here is a list of some of the mold manufacturers.
http://redding-reloading.com/online-catalog
Saeco has a 245 gr. .35 cal. GC
when you get to the mold charts, click on the middle chart
Last edited by 475BH; 04-26-2011 at 07:24 PM.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |