Attention! Attention! Rerun Miha .45-200g Cramer 4 cavity mold

[Triggerhappy]

Back by popular demand! Original thread below:
http://castboolits.gunloads.com/showthread.php?t=97566

Ordering directions, and how the process works.

To make sure everyone's on the same page, below is an outline of how this group buy will work.

This mold will be a brass .45 200 grain 4 cavity mold using an identical cherry used in his last .45 200g run which was very popular. This mold has the base similar to the H&G68 and a Miha designed ogive which is very popular with 1911 shooters. I personally like using this bullet in my XD's because it simply feeds without any problems. This is the same bullet design Miha started out with here in his single cavity, then his 2 cavity Cramer molds.

The mold will be available in two sizes, .452" OR .454". You will also have the choice of a solid bullet mold OR a Cramer style hollow point mold. The hollow point mold can also create solid bullets by turning the HP pins around.

The Hollow point mold will come with round cavity pins. 5 sided cavity HP pins are available for an additional cost. (Most people opt for the extra pins) Cavity size and Solid/HP can not be mixed within a mold. You're getting either a HP or Solid mold in one size per mold. The molds will be offered in either .452" or .454" and should weigh around 200g in HP and slightly more in solid. Standard Lee 6 cavity handles will work with this mold. (Miha also has some higher quality handles available on his site)


1. Choose which size mold(s) you want. The options are either .452" or .454"

2. Choose whether you want a Hollow Point or Solid bullet style. Prices and shipping are below.

"SOLID" = NO Pins - $95 + $15 freight = $110.00 total
"Hollowpoint" - $130 + $20 freight = $150.00
Hollowpoint mold with set of 5 sided pins as well, +$16 extra for a total of $166.00
If you purchase 2 molds Miha will ship both for $25.00

3. Post on this forum thread your mold choice stating HP or SOLID and size, and your contact email address. Please "code" your email address so it can't be gleaned from the site by bots. Example below.
"triggerhappy at domain dot com"

4. I will add you to the list in post #1 and keep a running total just for giggles.

5. When Miha is within a couple of weeks of shipping I will close this thread. Do not get left out, once it's closed the raw materials will be ordered by Miha and we will not be able to slip you in. MAKE SURE YOU OCCASIONALLY KEEP AN EYE ON THIS THREAD.

6. Miha will use the list in post #1 of this thread as his orders list. Please make sure it's correct and what you want. Once the molds are completed, boxed and and ready to ship Miha will email you using the email addresses on this post to send you a payment request through Paypal.

(Do not gripe about Paypal here. I agree it's lousy and has it's problems, but it's what usually works. Remember Miha is in Slovenia.) Pay via Paypal or another agreed upon method between you and Miha. The Paypal requests go out in batches, so be patient, you'll get yours. The system can only handle so many at one time.

7. When this group buy closes depends on how many people get signed up. The more interest the sooner these will get built.

8. Once your mold has been funded Miha will ship it. Delivery within the US usually takes a couple of weeks. Sometimes a little more, sometimes less.

That about sums it up. If you have any questions please post on this thread or send me a PM.

If you have ordering information please only post it on this thread. Do not send me ordering information in a PM. I prefer to keep the record on this thread so there are no questions.

Thanks!

TH

------------------------------------------------------------------
I'll start it off...

brian at macgurus dot com - (triggerhappy) .452" HP All pins
medicq at comcast dot net - (MedicDQ) Need your size preference
mirelandv at gmail dot com - (mebe007) .452" HP All pins
g(underscore)blomquist(at)msn(dot)com - (2hawk) .452" HP All pins
devilsace at hotmail dot com - (Thinktwicez71) .454" HP All pins
lpeden at frontiernet dot net - (1911GrayWolf) .452" All pins
krantzent at googlemail dot com - (Snoopz) .452" HP All pins
icecold at izoom dot net - (icecold) .452" HP All pins
imprezions at yahoo dot com - (TravelingMan0491) .454" HP All pins
dragonrider at charter dot net - (dragonrider) .454" HP (ROUND PINS ONLY)
auzzie101 at msn dot com - (auzzie101) .452" HP All pins
huntnman at swbell dot net - (huntnman) .452" HP All pins
pattardi (AT) comcast (DUH) net - (phillip) .454" HP All pins
gocaptainawesome at hotmail dot com - (captain_awesome) .452" HP All pins
gwdisney02 at newwavecomm dot net - (firewalked1) .454" HP All pins
Bodydoc447 at aol dot com - (Bodydoc447) .452" HP All pins
jcgraeler at gmail dot com - (double00) .452" HP All pins
stfagen at msn dot com - (MightyThor) .454" HP All pins
danielklamfoth at gmail dot com - (denielk) .452" HP All pins
agrijag42 at mac dot com - (MikeS) .452" HP All pins
tcbnick at sbcglobal dot net - (tcbnick) .452" HP All pins
jamesallen1954atyahoodotcom - (jmcghee) .452" HP All pins
nathancampbell79 at gmail dot com - (tayous1) .452" HP All pins
kjhowler AT gmail DOT com - (Chapped Lips) .454" HP (ROUND PINS ONLY)
1DBBEHR AT COX DOT NET - (1dbbehr) .452" HP All pins
Junghc at sbcglobal dot net - (powderburner) .452" HP All pins
kevin dot ord at frontier dot com - (lostinthetrees) .454" HP All pins
ericl1 at charter dot net - (ltdshooter) .452" HP Round HP pins ONLY
fivegunner at sbcglobal.net - (fivegunner) .452" HP All pins
brucemartin13 at yahoo dot com - (chiefappraiser) .452" HP All pins
Kschuma1 at san.rr.com - (Baja_Traveler) .452" HP All pins
Diamondean at hotmail dot com - (DiamondD) .452" HP All pins
sthwld64 at gmail dot com - (castblast) .452" HP All Pins
69roadrunnerboz at comcast dot net - (edler7) .454" HP All pins
mpbarry1 at gmail dot com - (mpbarry1) .452" HP All pins
anthonybennett at comcast dot net - (AnthonyB) .452" HP All pins
mlkeith45 at aol dot com - (mtmark45) .452 HP All pins
mlaustin(at)ucdavis(dot)edu - (mlaustin) .454" HP All pins
rwhyte at wi dot rr dot com - (midnight) .452" HP All pins
kfreeouf at neb dot rr dot com - (freeokw) .452" HP All pins
sugdenjw AT msn DOT com - (Iron Mike Golf) .452" HP All Pins
imb123 at bellsouth dot net - (Fire_Stick) .452" HP All pins
E @ edsanford at cox dot net - (Echo) .454" HP All pins
Colt_SAA at RocketMail.Com - (colt_saa) .452" HP All pins
wahnehega at usa.com - (Spartacus) .452" HP All pins
wahnehega at usa.com - (Spartacus) .452" HP All pins - customer wants two molds
debent55 at frontier dot com - (Don1955) .452" HP All pins
tfehlhab at swbell dot net - (TFF) .452" HP All pins
tfehlhab at swbell dot net - (TFF) .454" HP All pins - customer wants two sizes
jeremy dot brewster at gmail dot com - (buyobuyo) .454" HP All pins
rsh at att dot net - (zipdog) .452" HP All pins
jjjordan at bellsouth dot net - (jjjds230) .452" HP All pins
FLYERTRYER at AOL dot COM - (45-70 shooter) .452" HP All pins
frosstyx_at _gmail_dot_com - (Noxi0uS) .452" HP All pins
engine4on at gmail dot com - (engine4on) .452" HP All pins
gary.banas at gmail.com - (gary0529) .452" HP All pins
e kellams 8 at g mail dot com - (Edward429452) .452" HP All pins
gunsmoke4570 at aol dot com - (Gunsmoke4570) .452" HP All pins
dshankin at gmail dot com - (d0n) .454" HP All pins
Caleb. Branscome at gmail. Com - (DrB) .452" HP All pins
willsfxsts at msn dot com - (hotwheelz) .452" HP All pins
Roger.Ronas0 at gmail dot com - (Roger Ronas) .454" HP All pins
davidaker at hotmail dot com - (davidaker) .454" HP All pins
vickiandbob at frontier dot com - (shotstring) .452" HP All pins
louiestanfield at gmail dot com - (CPL Lou) .452" HP All Pins
liljohnnie69 at gmail dot com (liljohnnie) .454 HP ROUND PINS ONLY
bobkelley1 at comcast dot net - (old wonderer) .452" HP All Pins
5090shiloh at gmail dot com - (Aaron) .454" HP All pins
mtheath at mchsi dot com - (tomme boy) .452" HP All pins
wind28631 at gmail dot com - (johnfl) .452" HP All pins
sidneyjanetsnow at bellsouth dot net - (JoeBob) .454" HP All pins
skeepes at comcast dot net - (Harry Callahan) .452" HP All pins
Stoneaxe42 (At) Yahoo (doot) Com - (Ozarklongshot) .452" HP All pins
codya at potlatch dot com - (cba257) - .452" HP All pins
kbcombrink [at} att {dot] net - (KCcactus) .452" HP All pins
Dirtdgger3355atyahoodotcom.(dirtdgger) - .452" HP All pins
justingrosche at yahoo dot com - (justingrosche) - .452" HP ROUND PINS ONLY
mikael[at]ritzen[dot]st - (Mikael) .454" HP ALL Pins
Duxr2shoot at sbcglobal dot net - (Okie2) .452 HP All pins
frankedwardthompson at gmail dot com - (Fthomp) .452" HP All pins
kentuckycajun at juno dot com - (kentuckycajun) .452" HP All pins
Ebashyagrill at aol dot com - (bxchef29) .452" HP All pins
robertzanoni at yahoo dot com - (dagunnut) .452" HP ALL Pins
Mhooper at amaonline dot com - (castblaster) .452" HP All pins
ydoibuy at verizon dot net - (TractorCrawl) .452" HP All pins
LCEL at hotmail dot com - (LabGuy) .454" HP All pins
mymodel52atcomc.net - (thebigmac) .454" HP All pins
brtram at comcast dot net - (ocelott) .452" HP All pins
alchucks at cableone dot net - (GREYGHOST) .452" HP All pins
Stevecsnare at gmail dot com - (Silver_Silver) .452" HP All pins - Updated email address
chuck doa 2002 at yahoo dot com - (Chuck4570) .454" HP All pins
mkstarling at gmail dot com - (mstarling) .452" HP All pins
crittrcallr at sbcglobal dot net - (Sheriff) .452" HP All pins
LeeCorley at frontier dot com - (Tripod6324) .452" HP All pins
jeff5tg at yahoo dot com - (PB234) .452" HP All pins
bennyritter at yahoo dot com - (slide) .452" HP All pins
wade plummer at gmail dot com - (wl620) .452" HP All pins
pardue10 at comcast dot net - (uaskme) .452" HP All pins

THIS BUY IS NOW CLOSED!

107 molds on order so far... HP BUY CLOSING SATURDAY THE 10TH

Solid mold list moved to post 307.

[Triggerhappy]

Medicdq, I need what kind of mold you want, and a size please. Also, please double check your name as I have medicdq as your handle but your email address is only medicq.

Let me know,

Thanks!

TH

[Triggerhappy]

Please check your handle and email address to make sure I got them moved over correctly.

[Triggerhappy]

Now for some bait.... These photos are the same bullet but in a 2 cavity mold. The mold you're ordering is a 4 cavity model.

[mebe007]

add me in for the additional pins

also to be honest just double checking, the #'s you listed shouldn't it be $166 with both sets of pins?

thanks,
mark

[Triggerhappy]

[cbrick]

Are these ALL four cavity, even the Cramer HP's? Two cavity? I read through your post twice, could have missed it I guess but . . . .

Rick

[Triggerhappy]

mebe007, Done.

[Triggerhappy]

[Triggerhappy]

cbrick, it's in the title, and I just added it in the body so it's a little more clear. Sorry about that, easy to overlook. This is a 4 cavity mold. The pics I posted are from the older 2 cavity version because I don't have pics of the 4 cavity version yet. Should be able to post some soon.

[mebe007]

last question as a double check, is it true that one can flip the pins for a solid rn fp?

[Triggerhappy]

mebe007, As far as I know, nothing has changed in the design of this mold to preclude you from flipping the pins for solids. I'll be able to verify that when I get the new mold from the last order. I'll specifically try it and post come pics. I know it worked on the 2 cavity version and this should be a 4 cavity copy of that.

[mebe007]

last question and i know there can be no exacts given here. but generally in group buys how long does it take for this thread to turn into molds at the door? i apologize for this question i am just new around here.

[Triggerhappy]

mebe007, No worries, happy to try to answer that question. It all depends on how fast we get a group of buyers signed up and how quick we can close this buy as well as what else he's working on.

The last .45-200 mold I opened the group buy thread on November 7th, 2010. We got great response and Miha closed the buy on 1-31-2011 with 112 molds ordered, so he could order the materials. 3-8-2011 Miha posted that we was about to receive the mold blocks. I expect we'll get our bills for the molds this week or next and receive the molds a week or two after that.

It takes time, these are custom molds of the highest quality. Miha also had several other very large orders to get out like the H&G68. It's all relative to the number of people we get signed up and what else is on the machine. Wish I could give you an exact date, but at least this gives you some idea.

TH

[mebe007]

no its all good. basically i was looking at the time frame for hoarding the money in my slush fund. gotta make sure i have my wiggle room. so now i know if i can get that 452460 mold to hold me over with some more casting fun

so it would be a couple months minimum to delivery essentially

[Triggerhappy]

I think it's safe to say a few months to completion. At least.

I'm in the same boat, have to juggle funds when the molds get close to shipping.

[TravelingMan0491]

HELL YEAH! I've been waiting for this to come back around. Put me in for one:

.452 hollow point with all of the pins

imprezions at yahoo dot com

[Triggerhappy]

TraveingMan,

You're on the list, finally! Welcome!

TH

[tonyjones]

TH,

Put me down for a .452" solid. tony dot jones1951 at att dot net. Could you post a photo of the solid nose version?

Thanks and regards,

Tony

[Triggerhappy]

Tony,

I'll post a photo of the solid once I get the first version of the mold, should be soon. I have never cast the solids because I prefer HP's. The solid looks just like the HP, with the front flattened off, it's not pointy.

You're down, welcome.

TH