Hi
I cast and gas checked some boolits with my new Lyman mold. Can any body recommend a load, I intend to shoot larger game at ranges under 200 yards. With my no1 mk3 smle
Thanks ccoz
Hi
I cast and gas checked some boolits with my new Lyman mold. Can any body recommend a load, I intend to shoot larger game at ranges under 200 yards. With my no1 mk3 smle
Thanks ccoz
Last edited by camelcullOZ; 01-25-2011 at 01:31 AM. Reason: Spelling
Any of Lyman's Cast Bullet Handbooks will get you on the right path.
Might want to start with "The Load" of 13 gr. of Red Dot. Just be very very careful of double charges.
1Shirt!
"Common Sense Is An Uncommon Virtue" Ben Franklin
"Ve got too soon old and too late smart" Pa.Dutch Saying
I don't have an Enfield but I shoot that bullet sized to .310" in my M1903 & 03A3 Springfield 30 cals with excellent results.
18-19 gr 5744 yields 14-1500 fps. Accurate and VERY low SD. While the 311299 is supposed to be the bore rider for the 30 cals. I've found the 314299 to be THE bore rider that works in mine. No reason you couldn't try those loads in the Enfield with the bullet best sized to your groove diameter of course.
Last edited by 405; 01-25-2011 at 11:28 AM.
27gr Blc2 and that boolit sized to .3105 in my Enfield does quite well. ...Geo
N.R.A. Life Member
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |