Search:

Have some but haven't tried them yet ! But in my .358 I used some 250 gr. Lymans (can't remember the # off hand with 16.7 gr. 2400 and they shot much less than 1" at 50 yds. Should be doing in the...

A shielded small wattage bulb pointed (closely) at the sizer works great as a cheap loob heater !

Hip

Roadie after just 6 posts the last one spewing w ho knows what has seem to have "HIT THE ROAD" !!!

Hipshot

If you don't flux you will skim off any tin and antimony (GOOD THINGS) in the mix as both are lighter than lead !

Hipshot

Sometimes the problem is not with the powder but with case tension on the bullet! Years ago I had a set of LEE .45 Colt dies that when I shot the ammo I reloaded was extremely dirty and that was with...

There is a total of 4 articles on reloading cast bullets for the Rossi plus one on sights.

Hip

I just tried those links and it is a bit F**ked up.
Click on the links go down to the bottom of the page and click on home----this will take you to Juniors website-------on the right side of his...

Don't remember where I got the sites----try these!

www.castbullet.com/shooting/rossi-s.htm

www.castbullet.com/makeit/rossi.htm

The articles were written by Junior Doughty .

...

You guys may want to look at this

www.castbullet.com/shooting/shooting/htm

Hip

Crooked,
WoW ! That is an old Weaver, but I can't remember the model-----is it a V5 ? And what is the extra knob for----I forget ?

...

My Reloader 7 is only a couple of years old----I used some of it today. There is no other color in the can than medium grey.

Hip

Thanx !!!

Newtire,
Glad it worked out for you !!!!! Just a note---I wait until after the first fireforming to trim the cases, it usually saves work as you MAY not have to do it twice (right away that is )....

Can anyone list the web address for Taurus for me?

Thanx !
Hip

I bet a lot of these tests especially Ackleys weren't done at the public range with his face very close to ?????????? PSI going off !

Hip

IF...

jh45gun,
I have 3 or 4 rifles that love that load of 2400 with both cast boolets and jacketed !
They are .30-30, .30-06, .35 Rem. and .358 Win. They should be doing around 1500-1600 fps. give or...

When I shot and killed my neighbor, it cost me $10,000.00 in lawyers fees and 15 yrs. in prison !

Hip

P.S. The good part is I am a...

.22 Jet brass was also mentioned. I almost forgot but I bought 100 pieces of brass from Huntington Die Specialties. The price was very reasonable, but I haven't tried to fireform them yet.-----If I...

shdwlkr,
Try the annealing, you shouldn't lose any ! I'm using just my RCBS loading dies to form the cases---NOT forming dies!
To anneal stand the deprimed cases (brass cases are better-not...

I KNOW, I KNOW we will keep pushing the oversized bullets through .307-.308" barrels until someone is the winner and BLOWS UP A RIFLE, FINGERS AND FACE to save a shekel !

...

I have a .256 Win. and never had too much success at forming brass until I :

#1 Annealed the once fired .357 brass
#2 Sized it in a...

Not yet but it shoots great in my .35 Rem. with 35 gr. IMR 3031. Should give app. 1900+ fps. Groups 3 shots in less than 1 " at 50 yds. I would try 35-40 gr. 3031 in the .358 Win. That is where I'm...

With the crimping problem, it sounds like you are flareing the brass too much ! Also think about your rifle cleaning practices----if you use excessive WD 40 which is a penetrint it could kill the...

MIke,
Some bullets for the SKS are .310 " diameter bullets and some (US) made bullets are .308" . For the .30-30 I would stick with .308 bullets as a lot of the .30-30 bullets available are .307"...

Naptha will also work nicely-------price ???

Hip