Search:

Folks thank you for all the info. I apologize for not getting back quicker I'm studying for my CDL. I had it once let it lapse 20yrs ago mow have to have it again. Studying stuff for a test in your...

Thanks for the info. I'm shooting once fired Winchester SuperX brass. As long as the brass is clean I'm good doesn't need to be shiny correct? I will try to get some pics? Not much of a computer wiz.

I have finally got around to reloading its been a long time coming but finally loaded up some rounds and shot them. I'm loading for a Marlin Model 1893 built in 1903. I used 27, 28, and 29grs of 3031...

Thank y'all very much

K thanks

Is the Randy Rat guy that sold beeswax gone? Didn't see him in the vendors section. Not on here alot.

I recently purchased a NEI mold the mold is in great shape but it didn't come with any screws to hold it on the handles. I have several Lee and a RCBS mold and none of the screws from them will work....

Thanks Sharps

Thanks for the post Sharps 45 90. Open cell foam filler, is that the same thing as the stuff in the can to seal up cracks or are you talking about meat tray foam?

The reason I was thinking about using the filler was because of the size of the bullet to the bore size, the bullet is a bit undersize to the bore. This is a plain base bullet mold, would be using...

Thanks for the info folks

Thank you! I will look into that

I recently acquired a 1885 High Wall manufactured in 1890 cal is 40 82. After months of research on the net I feel like I know less now than when I started researching this caliber. I have an...

Thanks to all who replied I appreciate the advice. I'm going to try the polishing see if that helps. Mr Gibson I have tried running the bolt fast and it results in a deformed bullet nose and a shell...

How were you able to get to get inside the receiver to polish

I recently acquired a Remington O3A3 in 35 Whelen, the rifle is in great shape. The problem I'm have is that some ammo won't load from the magazine into the chamber. Federal Fusion 200 gr and Nosler...

I maybe wrong but during the debate over green tip 5.56 ammo,I'm pretty sure I read that bullets made out of solid copper could be construed as armor piercing. The solid copper bullets would fall...

Thanks guys

Thank you sir,that's what I wanted to know. So it would be best to use a duplex load when using this powder in 45-70. I have 30-31,Imr 4895,Rel 7 and nothing but large rifle primers.

I've been looking into trying these powders with 45-70. The loads I have found are duplex loads. Is any body using these powders alone in 45-70? How is that working out? Can you use a large rifle...

I keep mine in old side by side refrigerators out in my shop. Seems to keep the temp stable, no wild swings in temp.

jeffinnz,that sounds like a good idea. Only thing,I thought I remember several threads where that mold had lots of quality control problems. I believe the diameters were incorrect alot. I could be...

Thinks I will check into that.

Looking for a good mold for a hunting boolit. In the 170 to 220 gr range. Something like the ranch dog shape but bigger dia .314-.316. Gas check mold

Ben,thanks for the reply I guess I'll get to reloading now.