Guys,
What other calibers have wasp waisted/skirted pellets besides these calibers, for air guns?
17 - 20 - 22 - 25 - 30 - 35 -??
If it has a solid base (no hollow skirt), I call them...
Type: Posts; User: nvreloader
Forum: AirGuns
Guys,
What other calibers have wasp waisted/skirted pellets besides these calibers, for air guns?
17 - 20 - 22 - 25 - 30 - 35 -??
If it has a solid base (no hollow skirt), I call them...
Forum: AirGuns
Randy
Here is something to chew on,
What about making a pellet sizing press, for any caliber you shoot,
then you can size the heads/skirts of the pellets to fit your prized air guns barrels etc....
Forum: Casting Equipment
And just for the record, the thread size for these press's top punch is 5/16x24tpi.
Now I can start making the sizing dies I need, using NOE sizing bushings.
Don
Forum: Casting Equipment
Thanks Bent Ramrod
On the .308" measurement, I'll check it out, that may be close, the one bit of info I got was the thread diameter is 5/16x24tpi = .312".
I checked the shop and I don't have...
Forum: Casting Equipment
Can anyone provide the thread dimensions/spec's for the top punch, for a Cramer or Saeco lube sizer press?
I have 2 different Saeco presses that have different sizes for the threaded hole for the...
Forum: Casting Equipment
Fred
Thanks for the information,
my press is Black colored and has a left hand operation,
and has the gas check seater as shown in the photo.
I could not find the top punch thread diameter...
Forum: Casting Equipment
Well guys
I like some help/information about the 2 new (to me) lube sizers,
both came with NO top punch and dies.
1. Is a Cramer Brand name (North Hollywood Ca), it has a cap headed Allen screw...
Forum: AirGuns
corbinace
Try here, best price I have found so far. You have a choice of all 3 calibers, I would stick with 22 or 17 calibers,
unless you have larger varmints to deal with....
Popper
You can rotate the bayonet to the side or just slightly offset to the iron sights,
I have made several different spacers to fit all my weapons, with muzzle brakes etc
Forum: Factory Rifles
+ 2 for the Roberts
And don't forget the 221 FB and 256 WM cases, in their pistol forms they were tops..........
Forum: AirGuns
Rancher1913
You can visit here and see that there is quite a few of us that cast pellets,
not as hard as you think.
https://www.gatewaytoairguns.org/GTA/index.php?board=229.0
I have 2 different Ohler's and the Magneto V-3,
Both work very well, but the Mag V-3 gets most of the workout,
the Ohler's require a longer set up time to use.
I have used it from my pellet...
I have KO version also and have been using it for the last 5-6 yrs,
It puts a very sharp edge on just about anything you can fit into the holder grooves.
I like the different angles, I use a 25*...
Forum: Casting Equipment
Guys
Just an update on this Herters # 49 lube sizer,
finally got all the "yuk" clean out of it, and got it lubed at the pivot points,
I can't find any size dies for it yet, but still looking.
...
BB
You might want to check out NOE molds,
I don't know for sure that they have a HP,
but I know they make several molds in the .251" to .260" diameters.
...
Forum: AirGuns
You can find a lot of info here:
https://www.gatewaytoairguns.org/GTA/index.php?board=12.0
And cast bullets/slugs and pellets are just as accurate, if you know what you are doing.
Tia,
Don
Forum: Casting Equipment
JonB
Thank you,
The info you provided, just about nails it down,
I have a Herters sizer that requires a .750" size die.
Tia,
Don
Forum: Casting Equipment
I checked my Herters and found that Lyman size dies fall completely thru the die sizing hole.
It measures a perfect .750" in diameter.
So, is this sizer the proprietary from Herters?
I don't...
Forum: Casting Equipment
JonB
Thank you,
Those photo's are a carbon copy of what I have.
So the size dies are/have a threaded nut to hold everything in the press, which is no problem on my end,
as I plan on turning...
Forum: Casting Equipment
Guys
I have a Herters lube sizer press Model 49,
with the following info cast into the frame on the left side = KE154D1 -2,
there is a Number 7 cast into the handle frame.
It has a .750" die...
Forum: Casting Equipment
Thanks Guys
No one has any other brands, Saeco, Herters or other brands,
I also have a Star 60's model, but I am not messing with it, works too good.
Tia,
Don
Forum: Casting Equipment
Fatfudd
I forgot to add .223 diameter to the size die list, sorry about that.
Tia,
Don
Forum: Casting Equipment
Fatfudd
NOE has sizing dies that will fit the 22 jet, look in the Air gun size die section,
on mine I found 221 & 222 diameters worked the best for me, that will all depend on what alloy mix...
Forum: AirGuns
Guys
Go here to read about these pellets, several shooters are reporting great accuracy,
I have not got my moulds up and running yet, working on a pellet sizer/head bumper, first,
using NOE dies...
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |