Search:

I bid 90.00

when you close the mold, do not hold the sprue handle, it will cause a gap and cause flashing.

Try using a shop vac to draw the glue into the crack. It works.

Look for BaBore.

I found a hand full of unfired 22 rimfire with "22" as the head stamp. Any one know the maker of this ammo?

I will take the 38 super brass. PM sent

PM sent on 33 win. dies

Have you tried flaring the gas check before seating? Looks like the lip of the check is hanging up on the die as you insert the bullet nose first into the die. Looks like base first is the way to go.

It is worn. There is a lot of play in the ram. Check out Buckshot method of drilling and taping the collar for adjusting screws.

Running my clubs indoor range I find a lot of factory ammo with primers that look like the one you found. Oversize firing pin hole allows brass to flow around the firing pin and gets wiped off on...

Think funnel shape, very slight taper. Bill

I would try to call Lyman customer service and try to get the right part. Is your old pressure screw still good?

Lee 452-200 RNFP & 452-255 RNFP 6 cavity molds $75.00 for the pair shipped. SPF

Lee 452-200 SWC & 452-228 RN 6 cavity molds $75.00 for the pair shipped SPF
...

I have a RCBS 124 grain RNTG two cavity. Excellent condition You can see the mold at midway. $55.00 shipped. Let me know!

Yes it will . PM sent

one time bump

First picture, the 4 pieces are lee decaping bases. Last picture is the drum and adjusting stem for RCBS powder measure-Uniflow.

I removed the bad element from mine. I drew a line across the top of the plate using a square and the center of the wire. Clamped in the drill press vise and marked the center of the edge. I drilled...

I use dawn dish soap to degrease then wet tumble in my STM tumbler. They shine like gold.

Remove the jam nut on the bottom of the threaded guide rod and run the threaded guide up until flush with the casting. Harder for me to try to explain than it is do. See if this will get you the...

There is nothing under the cork.

This is the cap for the lube reservoir on the Lyman bullet sizer luber.

We bought new recliners.. We are working on year 54 married, after dating for two years.

PM sent on 457 die.

PM sent on 309 die.