Search:

This is my go to boolit for the 9mm, it falls from the mold
at 131gr, it works great in every 9mm I own, it falls at
.361 so I can fit it to any 9mm or 357.
...

I value my LBT molds so much that I lock them away in my safe,
sure hope Veral is in good health for at least 75 more years.

Many people can become a great shooter very fast if they get started right.

The first thing is get the proper training before you learn bad habits.

I shot on a pistol team in the army forty...

I would love to see that converted Rossi, what did you do to it.

Read both of these threads,

http://www.glocktalk.com/threads/grt45-archive.1421823/#post-22283466

http://www.glocktalk.com/threads/glock-30-30sf-30s-information.1421425/


I have done most...

This is good for cheap cf 22, for those that don't cast,

eight cents each
.224 Diameter 55 Grain Soft
...

Hope this is ok,

http://www.accuratereloading.com/223rem.html

Reduced Loads for 223 REMINGTON
The following loads were developed in a Sako S491 rifle, with a 22" barrel. All groups were 3...

My best 187gr fngc will not fit in a m27, too long, it shoots 1500fps in my three gp 100s.

Three inch groups at 100yds are doable and under six inches at 200yds are doable in
the 6.5'' BH.
...

here is the data for the old 2200 powder, I too have five to six 8lb kegs,

http://www.accuratepowder.com/wp-content/uploads/2011/04/DP2200.pdf
...

Synthetic grease is good too for both ends, I really like the grease on the ratchet and paw/hand.

Year ago, 1987 88, I was lucky enough to get a revolver smithing class from Ron Powers, he
does...

One of my best loads in the 454 is 8gr bullseye with a 250 rnfp,
goes 1025 in a 7.5'' revolver and 1250fps in the 20''.

The one in 454 will shoot 45 colt.

I have a 16'' and a 20'' SS in 454 and 4 revolvers to go
with them, the ones in 454 are tougher , I would not buy
one in 45 colt.

I own five guns that shoot 10mm, longest is 6.6'', none of them will beat a good 357 in
fps with a 180gr boolit. you have to compare the best loads in both to make it fair.

I also own nineteen...

I like revolvers for most things too, but, with my Glock g20s I shoot 10mm, 40s&w, 357sig and 9mm,
all from the 10mm magazine. You can get a 38super barrel for it too.

The extra barrels are...

How is the TRS25 holding up.
With my old eyes I can see it better than the U dot, it's brighter and cheaper too.

So far I have owned three of the old D mag BFRs and three of the newer BFRs,
the...

44man, your .454 may not be a good deer killer with hard fast boolits but mine is
great with them.

There still can be something bumping and you are not noticing
it and taking power away from the hammer fall.

I have seen this in Redhawks including my own.

if you can get the prints of the RH and find what the
distance is between the trigger pin and the hammer
pin you can drill that in a block of steel and put pins
in block and trigger and hammer on...

I discovered Veral Smith in 1987 in gunsmith school, get this book
and you will know what it takes to make your revolver shoot like
a rifle.

http://www.lbtmoulds.com/books.shtml

I would polish the largest chamber smooth with 400grit and measure
it and bring all the rest to that size, I use to do this for a living, if you
don't know what you are doing have someone that...

I made a 06 Ackley years ago and someone got from me before
I had a good chance to work up some loads.

I still have the reamer and am going to make another one with
a match barrel on a Howa...

In the 1980s I went to gunsmithing school and was lucky enough
to have a revolver class by the great Ron Powers. I have owned
shot and worked on most of what has been listed on this thread.

...

I have had the LBT 187gr version with two crimp
groves for 18 years, the oal on my loads is 1.635 and 1.675
depending on which gun I shoot them from.

A six to 6.5'' GP100 or BH will do 1500fps+...

Something else that can make things worse is use a 110gr boolit and
seat it out of the case farther rather than the heavier wc, heavy boolits
usually help ignition. talking about the 38sp
...