Search:

This is exactly right. A d shaped clutch will not work. Even the hex can strip out. That is why I use hex-pin these days.

I can't see your picture well since it is really small as an attachment on CB, but If I would have to hazard a guess in my experience the motor is getting power regardless of the sensor. Maybe the...

This came up a few pages back. Here is my response.
https://castboolits.gunloads.com/showthread.php?354324-Making-that-Bullet-Collator&p=5706755&viewfull=1#post5706755

Quick google and tons of links. One even from a member here. This one seems to cover it. "Detect Thin Walls"
https://wiki.bambulab.com/en/software/bambu-studio/wall-generator

I don't use that slicer so I don't know. This question does come up a lot. I am not sure why these slicers don't print thin walls by default. I have never had an issue with cura.

It's your slicer settings. You have to set it to allow thin walls. The wall is .425mm thick there.

1" round post mounted from the bench. There is a stl for the bench mount. then you just need a 1" round piece of aluminum / steel / or even a wood dowel. To be clear it needs to be 1" OD.

XDrebel's inline fab mount is in contributors folder.

https://github.com/BF556/Feeder/blob/main/9.%20Contributors/XDrebel_APP_InLineFAB_QC_Mount.zip

That is how I run my case feeder. regular drop tube, with the Dillon_Drop_Tube_Adapter that goes to the dillon case adapters.

On the link i sent it shows $120, but makes sense If you already have it and they want to charge $170 for adding them. I didn't notice the side plates were aluminum till you said it.

Did you get the enclosure panels?

Would love to hear what you think about it.

Welcome to the party!

You did not mention what brass you are looking to feed, but I don't think it matters. Short answer it 10rpm should be plenty to get to 3k/hr. For example, if you were...

I am definitely willing to add. I looked at you pics but not exactly sure what you have going on. looks like a square tube mount that can adjust height?

If you have any change suggestions feel free to email me. I don't want to re-write the thing but I am always open to tweaks here and there.

It is just in MS Word. I have it and do make tweaks from time to time.

All very good points. I had considered using "Legacy" as well, and since you just threw it out there I will go with it. I think I will avoid moving them out of the folder for now, but very well...

FYI I renamed the entire Drop Tube's folder today. The versions designed for prox are the official latest version. They are now just labeled with the original file names. Drop_Tube_X and...

Don't worry about the Cura error. Yes there are some files that give that but they print just fine.

The file GWS posted is actually the latest (short) version.

I would also recommend you grab...

Honestly couldn't decide on where to put them. They ended up in the Main Body folder since that is where the drop hole adapters are, and the spacers are an extension to that. They could also go in...

See, I knew you would set me straight. The config makes sense, and could be used with stock parts, minus the spacer you are using. I added both the funnel and straight wall versions to github.
...

Not sure I am following GWS, could be because I am slow. The drop hole on the collator body is 16mm dia. If you attach the top adapter, it is going to go from a 16mm hole directly to a 10mm or 14mm...

I had the same question. If he is running a tube straight from the collator then the cone entry is the only answer for the top adapter. Otherwise it has to be some kind of offset adapter.

Nice. I have been snowblowing all day here.

Go to Adapters folder on github and check out the Lee_Tube_Adapters.