Search:

i powder coat , pretty simple and easy to do yardsale toaster ovens work fine

check plumbing shops

inside neck trimming is nessary if you neck down a brass from say 30 caliber to 22 caliber. or make a custom brass that is shorter than the parent case where your using a part of the case that's far...

Goodwill and thrift stores usually have toaster ovens for under 20 bucks i scored mine for 7.00
darn now i'll never find another one you guys will have them all=--LOL.

H&R--handi barrels DO NOT INTERCHANGE they can be fitted , maybe,

many people like them and shoot them check ASSRA .com i have a stevens marksman that i made a figure 8 type scope mount so no drilling was necessary and i used it as my squirrel gun for many years...

mine is stainless 8 3/8 in barrel very accurate with cast, starmac it has a very good safety that allows for a full cylinder carry. put on half cock, depress the cylinder rod retainer pin, push the...

accuracy is my only reason for reloading.

PAYPAL donates heavy money to all anti gun causes and i want to tell you it is hard to defeat your enemy when you are supplying them with ammo.,

the hole is empty it gives you 3 decreasing circles to center the target in, i have them on a very old mossberg 22 , factory even, and it will pop the head off a turkey at 75 yards.

actually you do sound more like grumpy ! LOL

http://www.mcace.com/shotguninserts.htm
save time and money just order a liner from here.

you may wish to call dave at CH4D they will have your dies and maybe as cheap as you can get them anywhere quick guess is they would be in the 83 dollar group.try this--http://www.ch4d.com/

your good to go.I dropped a deer at 150 with my 357 martini neck shot bang flop

found mine in a trash can in the early 50's and the action was the same color as yours is then never gave it a lot of thought.used it as my squirrel gun for many years.

if you want/need a 310 original barrel i have one in great shape

that old action held up fine but the barrel blew off , funny how that"old, weak, requires reduced loads" action usually fails with the barrel blowing off. Hope brother recovers and does not devlope a...

The dragoon no question, better built and stronger than a black hawk, far better trigger due to not having a striker system and timed not to cut a rut around the cylinder. The dragoon uses a...

http://www.leverguns.com/articles/paco/357_magnum_and_the_literature.htm
read this article it is most informative on the round .

loose the cowboy loads and bump it up to where it should be. the light loads have a place COWBOY SHOOTING if your going to shoot any distance or hunt you need to load it a bit heavier. Your bullet...

Me too

homemade stuck case remover; tap drill for 1/4 20; 1/4 -20 tap; one 1/4 -20 bolt and nut ; socket and washer;
drill and tap the stuck case thread the nut on the bolt put washer on the bolt slid the...

O.K. the turret system is a great time saver adjust your dies once and done.
well that sounds great until you take that first turret out of the press.
What you mean there is no way to sit this...

32-20 brass is very thin and delicate. cheapest supply i have found is. affordablebrassandbullets.com

I have not seen anyone who carries it outside of cabelas in a while.
fun round...

my lever action 30-30 is a old mossberg and the trigger moves with the lever.
do lever actuated martinis count?