Search:

if you can get sealable buckets like from a pool company and put it in the bucket with anhydrous calcium chloride from pool supply and leave it there for a while that can dry things out. I have used...

I went and found my old lyman spartan press under my workbench.

maybe bring the scale to local pharmacy and see if they will let you use a weight from their prescription balance to get a known weight. it will be in grams so you would have to convert.

I made a rig to use tubing cutter that can adjust where to cut using drill on hex on opposite side of cutter 310583310584310585310586

if you dont have or want to 3d print you can do what I did for shell holder for 25 auto, got plexiglass and drilled 50 holes in it and glued it to another for the bottom, you can drill smaller holes...

I store in gun safe bottom to make it heavier

dillon 550 and rcbs a2

I found I have to trim outside neck and trimming inside was a pain so I ran them in 308 win die for the inside width then they would fit the outside neck trimming tool but the cutter head is longer...

I like mine, got it for $1.00 at swap shop. looks like the one with the spring attached.

https://www.amazon.com/Magnifying-Shooting-Safety-Glasses-Colors/dp/B08GHBGLWB?th=1

C2 Top Focal Magnifying Shooting Safety Glasses, 7 Frame Colors

I got one from a yard sale and it only needed minor cleaning.

I have 3 four pound jars of another brand ,shockwave. it has the dark powder pre measured in a packet in the jar of the white stuff so I do not have to measure. unfortunately there are no ranges near...

can you use this
Hornady Universal Extended Shellholder

I used mig welder to weld an old 3/8 inch 1/2 inch drive socket to end of shaft to drive it with drill with 1/4 " square drive bit.287755
its not perfectly smooth running because it still has handle...

if you have a vhs player and get a Hauppauge , you can plug hauppauge into computer and output the vcr into it and basically play tape into it and record video into computer.

put it in a sealed container with damp rid, calcium chloride sucks moisture out of the air

286234286235286236

I dod something similar but don't have 3d printer, I molded a coat hangar to wrap around my hand instead of the gun and have a loop with net behind it so it does not matter which gun since it holds...

maybe you can cut the end off of a 3cc medical syringe and the cc calibrations will allready be there

I have a box labeled 9mm mak and its .364, also have some .362 and .356 from a batch of stuff a while ago. the 362 and .56 is loose so not sure but the .364 is labeled as mak

279515279516279515279516

I went to a pool supplier and got anhydrous calcium chloride used for pools, it is the active ingredient in damp rid and cost less there, it was a 50lb bag that I keep in a sealable bucket.

they make rubber bullets for 223 for non lethal, I tried them in ar with a special bolt so it cycles

275423275424275425275426

I saw similar on ebay
anyone know value? I am not looking to sell, just some info

anyone think you can mount it on a bigger metal plate and use a single countertop burner upside down to heat from the back ?