Trying to find a taller Lyman 17a sight for a Mossberg Model 42 US Military 22lr rifle. I have a low 17A. It is as low as it can get. You can barely remove the screw in part for the inserts. It...
|
   
   
|
|
Type: Posts; User: gmsharps
Forum: Swappin & Sellin
Trying to find a taller Lyman 17a sight for a Mossberg Model 42 US Military 22lr rifle. I have a low 17A. It is as low as it can get. You can barely remove the screw in part for the inserts. It...
2 3/4inch 7.5's are dove slayers in my 28 but the steel in that length is a tad enemic. I use the 3inch Federal #3's in steel and they really work well on ducks. I don't load steel but do load for...
I use a rcbs separator to separate the pins from the brass. I then pour the water off the pins. There is nothing left in the barrel and the pins are still wet to the touch. If you run your hands...
I have been using this straight during the day for over a month. It started slowly with the water getting darker then almost black. If you run your fingers through the pins your hands would be black....
Did you do anything to the barrel to kind of seal it so the black would not rub off. Don't know if my barrel has gone too far to be saved.
gmsharps
They are not cheap. For the Rubber barrel and that rubber gasket on the top is about $80.
gmsharps
I have a Thumblers Tumbler Model B I have had and used for about 40 years. About 6 years ago I started using the wet process with stainless pins for polishing my brass. Using 5 lbs of pins and a...
Forum: Swappin & Sellin
I may have that I’ll check when I get home
Gmsharps
Forum: Swappin & Sellin
Glad to see someone pick up the star sizing dies. Now I just need to see what I have to have
Good luck
Gmsharps
Forum: Completed Deals
I have a 2die set of c-h 32Win Spl.
Gmsharps
323751
323752
Forum: Completed Deals
I have a set of nos (new old stock) 2die set by c-h a file trimmer and a neck sizer
Gmsharps
Forum: Completed Deals
This thread is now closed.
Thanks to all,
gmsharps
Forum: The Star Equipment Corner
I think backing off on the spring pressure would alleviate most of the issue.
Gmsharps
Forum: Completed Deals
Listed below is a batch of brass I am selling. As far as I know it is all once fired. I have deprimed a few over time but most are still primed with the dead primers. The 45 acp is all large pistol...
Forum: Completed Deals
This thread is now closed.
Thanks to all.
gmsharps
| BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
| BR | Bench Rest | M | Magnum | RN | Round Nose |
| BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
| C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
| HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
| PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
| LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
| GC | Gas Check |