Search:

PM sent

Remington XP-100 Chambered in 458 Win Mag.

I want one now!

PM sent on the 24X

Save your money and get want you want!

Dillon has always provided me with excellent customer service.

Yup, nothing left.

That's the way I do it too! Sometimes I'll find a dowel that is similar in diameter and use it alsoo.

I have enough rifles that I no longer just use one to hunt. I shoot between 65K and 100K bullets a year, but for hunting purposes, I just grab whichever one strikes my fancy and use maybe 5 rounds...

Burn rate charts are your new best friend when there are limited powders available.

The 6.5C is NOT a perfect case for fireforming. The shoulder junction is shorter than the 300S case. Your best bet would be to form a false shoulder by expanding the 6.5C then fire forming it. I...

September last, there was a local gun show and I refused to buy primers at $100.00 a brick. Big mistake...

Not a problem at all. When USPS asks me what is in the box, I tell them tools...

If you are asking what brand of powder to PC with, then I would recommend the one from Smoke4320 who is a contributor on this site. If you are asking what type of powder to load with, then whatever...

Is it blued or SS?

Better trigger trumps everything else!

As most of you know there has been a shortage of primers nationwide. I was on the waiting list at my LGS since January of 2020, and got a call yesterday to say that they finally received some Small...

Just redrill the bottom of the tang screw hole in the buttstock. The recoil forces bear against the shoulder at the front of the stock and not the tang screw.

I remember back in the 60's when you had to pay extra for SQUARE lead shot. It supposedly opened up faster for Quail and Woodcock.

Yes, it can go bad. I had some Lyman NRA lube that turned into a mushy, moldy, mess. However, I also have some Carnauba Red older than yours that I still use.

I was wanting one of the early model 24's for years, but they were always a bit spendy. Got my hands on a 5 1/2" Lipsey in 44 special and never looked back.

302871

It has always amazed me that no one in my area harvests shot from the local trap or skeet range. I use a colander made for washing rice to classify the larger pieces of rocks and clay birds, put it...

I've used 6.1 grs. 231 behind a 160 gr. bullet in my 357's for plinking. It should be plenty powerful enough for 50 yard plates.

Larger cartridges are MUCH easier to get accuracy out of than a smaller one as the deviations between the bore/cartridge are minimized by the bore size. That being said, you gotta practice to be...

Exactly how I'd do it too...