Search:

I just received my RCBS kit from DeWayne. It is really nicely done and will make using a 4 cavity steel mold much easier. ;)

Buy some Cerrosafe from Brownells and make a cast of each chamber and lead. This is the only way to tell what cast bullet diameter is best for each gun.

Lyman 311291 is the my best bullet for 30/30. Takes deer DRT.

+1 I use 1.100 and size at .357 also. Works great in my Sub 2000, P9 and M&P.

Hi,

I am about to buy one of these and sell the Lee sizers that I use when powder coating. Would it be worth dimpling the insert to give it room to move but not fall out?

Regards,

John (not...

Tag for info

I use the "Beware of Dog" signs from HD and I anneal them in the oven. I cut to strips with a paper cutter before annealing. I then set the oven on 350 degrees and let them sit for an hour. This...

I would be interested in anything lighter than the 175gn lee in six cavity.

John

I have a S&W 16 that I am tired of shooting light Lee bullets in. I would buy a six cavity Lee if weight was 115 or above.

Regards,

John

To make your brass last the longest, do the following.

1. Full length resize and trim
2. Anneal the neck
3. Load with 5 grains of Red Dot and fill with cream of wheat till full. Seal with a...

I buy .011 "Beware of Dog" signs at Home Depot for $1.47 each. I sliced them into strips and then put them into the oven at 500* for an hour.

If you anneal before cutting, you wind up with...

the eighties and he was one honest guy. I never had to pay until I received my bullets. He never took my money up front. In the nineties, I believe his daughter took over the business or was...

Hi, I would be interested in this mold if it was @ 150 gn and .311 - .312 range.

Regards,

John:castmine: