Search:

I use Hornady 546515 9mm dies and a Hornady 046516 380 full length sizing die. Only had to buy the 380 sizing die and the rest of the 9 mm dies are the same. YMMV with other die manufacturers. Loaded...

I live in Indiana where we used to never change our clocks, stayed on the same time year round. The politicians and governor now have us springing forward and falling back. Now we have eastern time...

Everything is good with bacon or cooked in bacon fat.

Could be a possibility. A few more questions. Is the output close to 7 volts?

What is connected to pin 1 and 10? This is the internal current limit circuitry. Pinouts...

It is a LM723 equivalent in a metal can configuration since OP states it has only 10 pins.

Is the capacitor electrolytic? These can dry out over time and cause problems. Do you know the part numbers of the 10 pin regulator and transistors? Might help to figure out the problem.

We don't have ravens here. The turkey vultures will get the road kill before the crows.

I use W-231 with Everglades 95 grain FMJ bullets. Works great for me.

I turned my Caldwell upside down on a board using the wire rods. Mounted the board and chronograph on a tripod and placed free harbor freight lights pointing up toward the chronograph. Works good...

I second the Hornady with interchangeable rotary drums. Never had any issues.

Seems you may have the wrong range selected for the thermocouple. I briefly looked at the manual but I don't have a unit in front of me to test. This video may help to change units to degrees F....

I have had some success with taking a syringe and injecting a small amount of 91% isopropyl alcohol through the vent into the cartridge.
Keep in mind some HP cartridges can detect this breach of...

Call the animal shelter and see if someone called there looking for it. If it has a collar someone must have cared for it at one time. I know the feeling about abandoned dogs. I have had 3 or 4 I...

Hams still use code but it is not required for the test. Lots of code on HF bands.

Nice setup! I use a sling shot with a fishing reel and sling the HF dipoles in the trees. Works well for me. On VHF and UHF I usually use a hotspot with a HT to talk on the linked repeaters.

About a minute in and turned it off. Couldn't take anymore of the dancing "Pillsbury doughboys".

Tuned back to the channel with 35 seconds left in the game.

I had an Acurite 5 in one for about 7 years. Bought it at Cabela's in the Bargain Barn for peanuts because it had been returned. Finally replace it with an Acurite Iris model.

I use WeeWx weather...

Goo Gone on a cloth also works but not as good as acetone.

De-primed and cleaned more 9mm brass.

What MCU will you be using? Seems like a fun project endeavor.

Never lube pistol brass or 350 legend brass. All other rifle casings I lube

That's not how this works. That's not how any of this works..... Reminds of the old TV commercial.

Ed's Red without acetone is my go-to for most except cleaning shotguns then I add acetone.

I used to use a dry bicycle lube on my mountain bike chains and shocks that had Teflon in it. It was good...

Looks great.

Nice video. Well worth watching if you use Lee molds.