Search:

like Bsev, i run the Noe 247g with good success in a rem 700 1:7

i have a 3d printed x25 cradle for the mini chop saw that i use for making the B/O cases and i have a trim die that i can trim them after they have been sized in the x25 die

i load the non HP plainbase version for several B/O's, lets just leave it at it shoots pretty good
308408

or get one of the pat marlins check over plainbase checkmakers and use the bullets and same load you use now

i had a batch of 500 Winchester nickel 308s when we shot long range Tactical competition. they sized fine and actually felt like they fed better (smoother) in the rifles. they were loaded at least 7...

i know its commiefornia but maybe they should employ some actual qualified rangemasters with a functioning brain instead of a gender studies major that also works part time at a starbucks

i load 150s into LC cases with 16g of H110 and it still has some "shake" to it, so its not compressed. what cases are you using? some 223 cases when cut down are too thick at the neck area when...

how about a rhineland 45 acp conversion kit? its an easy screw on barrel with savage jam ring, a snap in magwell adapter and 1911 mags. makes a fun range plinking toy

my uncle got a few that way, he was there in 66,67 and 69. in 67 he was a door gunner on a huey and they came over a back cove on the mekong and suprised 2 anchored sanpans, the 3 choppers shot the...

like larry said, post a pic.
russia didnt make 91/30s or m44s after 1947 so that isnt possible, you prob are looking at a 3 wrong, china made m53s in that date range but they would have chinese...

think you mean 1937 if a 91/30 or 1947 if a m44. if 1957, its chinese.


some of mine slug upwards of 314, i cast a NOE 311365 that i beagled and they drop at .315, i powdercoat them and shoot...

its not shaving and shoots good thru all the 9s i load for from pistols to carbines, so why mess with success

round pulled
298311
pulled bullet next to unloaded bullet
298312
pulled bullet measurement, so my bullets are actually getting swaged slightly (.005 from .356 to.3555)
298313

so i guess my dillon expander is a qc fail, it measures .3555
298303
before loading
298304
loaded round after running thru dillon crimp die
298305

thats all i use. range pickups, and softer lead that you are using and dont have that problem.

i would check your seating die, sounds like there might be buildup of crap in it causing the squeeze down. im using that exact same die set except im using PC'd bullets (brn 10-11. sized to .355,...

a couple of mine slug 314 and 315, i cast a 311365 that i beagled and they drop at .315, i powdercoat them and shoot without sizing in the larger ones, or use it unbeagled (.3105) then powder coated...

alot of the milsurp ammo is steel jacketed lead core, so it will stick to the magnet anyway. only way is pull one and smash it or cut it open

did you make your dies or buy them? this might be a good bullet for the beowulf

yeah that greek hxp brass is what i mainly use in my garands

i can check at our local large gunshow this saturday, theres always lots of reloading stuff there

my FIL bought one of the swedes about 5 years ago, i have had a love/hate relationship with it. it shoots decent but destroys brass. it was one of the ones that was reamed to 50/70 by the swedes but...

like others, i have used many 1000's of CCI LR primers in garands and all the other semis i load for including ar10s, m1a, fals and a saiga 308

and dont forget while on trips, and your waiting in the rest area parking lot waiting for the woman to go potty and while walking the dog, look on the ground for lead, my last trip to virginia in...

for less than 200 yards, no sorting other than mil crimped primer/ commercial headstamp brass. for my 700 bolt gun, i use only rem brass with 55 or 60g vmax bullets, shoots moa or slightly less out...