Search:

Interesting...I shall have to investigate further into the .325dia then. Could still use some vendor links online where I can find a similar boolits for this application...

The .32cal .323dia 170gr .32/40 boolit I found was from Penn; and it's special order. Matt's example looks good...already got a gas check too. Thanks for the suggestion.

I did try to use the search function first for this question, but did not find my answer...can any of you gents point me in the direction of online vendors that sell cast lead .323dia boolits for...

Jim many thanks again for locating the article *and* for the actual article itself!! It did turn out to be new info too...

Yes, problem is I don't know the month. I have done some due diligence before hand: scoured eBay and the article is either a small sidebar article, or a small piece under their monthly handloading...

Hi all, I am trying to locate the particular issue of American Rifleman, published in 1986, that has an article on "Reloading for the .30 Mauser"; does anyone have an old collection of back issues...

The .314 diameter boolit seems rather large for use in a Broom. My Brooms with good bores (original) slug in at .308dia or .309dia.

I have a single well used import marked Broom with a...

Shoot. I saw this happening with my Pro1000 and couldn't understand why.

As pictured above, every so often the press would jam up because the brass case would not line up and enter the die...

Really kinda surprised actually, that this topic is not already a FAQ/stickie at the top of the Swappin & Selling section in big, bold font.

$10k penalty and/or a few years in the pokey for...

Chalk up another successful trade with Mr. Roscottjr.
I sent him brass. He sent me dies, as promised. He is good to go, in my book.

Pretty astounding. Thanks for sharing.

Yeah so how does it look inside? How is the breech end of that 75mm gun looking?

There is a yahoo group for C96 owners you might want to hit up if you are looking for other opinions specific to Broomhandles. The Jan Still Luger forums sub-group for C96's is also an excellent...

The .45ACP DoubleTap is anemic. Try the new Heiser Defense "PocketAR" (PAR1) derringer style pistols chambered in .223.

I'm holding out for the .308Win/7.62 NATO version, myself.

126914126914 Holy schnapps. That's amazing. Congratulations on the Panzer, looks like an Ausf A. That's gonna be one big **** boolit mould to cast those 75mm projectiles. Hopefully you will post pics...

Are you serious. You scored a Panther...?

That would be an HK G36K side folder slung on the guy in the middle. Some G36 polymer mags have two tabs molded into the sides that allow mags to 'snap' together. I suppose in keeping with the...

Some Hilton Yam input on the E-Series:

Detailed review.

Follow up.

First 1000rds.

Then 2000rds.

Good to know. The next time I have to tear the bolt down to fix a cracked firing pin I'll have to try and put one of those srpings in from Stevesgunz then.

Have two 16" Rossi 92's carbines in .38/.357 and one 20" bbl .38/.357 rifle length.
As said above, the 16" carbines are light, handy and to me just seem to point easier than their full length...

I love using the kinetic hammer on all kinds of rounds. Never done a 22LR yet. Why is this is bad idea?

126819

I realize the following isn't for cast, but maybe you can extrapolate:

71gr Remington .32ACP FMJ 0.309dia
Accurate No.7, 6.0gr, Win SPP, COAL 1.298", notes: Working charge, light duty, action...

lol. :lol: What do these look like? And do you need a special permit to hunt them?

Just to stay on topic:
30 Mauser (7.63x25mm)
- Bullseye 4.2gr, 85gr Sierra Sports Master 0.308dia JSP, Win...

Ford versus Chevy? Chyeah. MoPar or NoCar.

Just kidding, sorta.

The extra station is nice to have, as is the auto indexing.