From what I understand most sight insert cards are acid etched. A laser could not cut pcs.
Out and leave that thin of a line of material left. Something I was told .
Type: Posts; User: Mr.doug
Forum: Single Shot Guns
From what I understand most sight insert cards are acid etched. A laser could not cut pcs.
Out and leave that thin of a line of material left. Something I was told .
Forum: Black Powder Cartridge
I am not aware of any Bpcr matches that do not allow a bore pig or patches to run down the barrel between
Shots while on the line shooting a string at any type of targets. Some people use a blow...
Forum: Black Powder Cartridge
Arnie sietz aka beltfed email is seitbach@wi-net.com. I know he was getting low on cleaning rods
Just talked to him yesterday about som other things.
As for cleaning from the muzzle to breach...
Forum: Black Powder Cartridge
45 cal. I’d go with the 3/8” delrin rod. U can tap the end for jag or brush . Flexible enough to go around sights.
Been using one for several years and like it . If u go on assra.com look up...
Forum: Rimfire Area
Toss up between Marlin 39 lever or the hi standard supermatic trouphy. Both extremely accurate
Forum: Cast Boolits
Even if you were to make all the bushings , how would u get all the lube holes
To line up from die Body to inserted bushing and keep it there. Hmmm?
Forum: Rimfire Area
High standard supermatic trouphy 7 1/4” barrel. Most accurate and balanced pistol I ever shot.
Worth the investment, and won’t devalue.
Forum: Rimfire Area
I built a Kidd 10/22 riffle several years ago , everything is much beret than a Ruger . ( you get what u pay for )
But as for the kidd 2 stage trigger it’s down to 3 oz. I don’t think it can get any...
Forum: Black Powder Cartridge
I bought a used shiloh in 40/90 ss 10 years ago. Had a lot f problems with the brass, BACO always had it in stock
But it was 4.00 a case and was 405 basic rolled out on a manderal to make it 3 1/4”...
Maybe a 1000 Bpcr loads and 1000 pistol and lever gun loads in a year
Not including rimfire
Forum: Black Powder Cartridge
Loaded Bpcr cartridge for years , just tried 31.5 gr of oe2f with 250 grain lead bullet
Kind of stout for a 45 colt vaquero pistol. Question, can there be air space in this cartridge
Or is that...
Forum: Single Shot Guns
Bad ass Wallace , what is this 545 gr. PGT bullet that u have a pic. Of. Can u give me
Some specs. On it and we’re did you get the mould from. Thanks
Forum: Reloading Equipment
I second the lortone, I’ve had it for only 5 years works excellent and quite. I use ceramic media. 45-90 to
40-65 will fit 60 cases and it not even half full. 2 hours all bp residue is gone.
Forum: Single Shot Guns
If those are double set triggers it is probably a John bodine model. Front sight could be
A Lyman 17a . I have one but never put anything but holy black in it.
Forum: Black Powder Cartridge
Thank you Steveu. Just ordered some from them. So know I will use borepigs with a wet patch
Behind and a chamber mop will see if it will eliminate some of this leading.
Thanks for all the input
Forum: Black Powder Cartridge
Could poor fouling management cause leading to start? Being a 34” barrel maybe I’m not getting
All the carbon out with patches. Would like to get bore pigs but I cant find any vfg felts anywhere at...
Forum: Black Powder Cartridge
I have a hoch nose poor that basically mimics the Lyman 457124 government round nose , it drops at .460
And I still get the same amount of leading.I seat all bullets out till touching lands
Most of...
Forum: Black Powder Cartridge
Got a ped. Rolling block in 45-70. I’ve got a very accurate load using 1.5 swiss .060 wad with
.100 of compression. Get home to clean and there is always a few slivers of lead in bore. Using
A...
Forum: Black Powder Paper Patching
The main reason I can get 67 grains in that case is a 3’ drop tube
A long freeboar and first driving band reduced. 3 grease grooves are exposed when bullet
Is seated.
Forum: Black Powder Paper Patching
I have a browning 40-65 I just shot 56 rounds out of Saturday and had some
On my casings with the same look to them. I chose not to chamber mop
At this gong match. Acuracy was very good for me so...
Forum: Black Powder Paper Patching
If that’s a 45-70 you are shooting I would not go more than an .060 wad or you will giving up
To much case capacity for powder.
Forum: Single Shot Guns
Don’t forget to anneal the brass first
Forum: Black Powder Paper Patching
Moisture in the chamber after wiping will do that. Or the case was not annealed and is not
Blowing out enough to seal chamber. If it’s moisture, use a chamber mop after wiping.
Forum: Single Shot Guns
I have a 74 lre with semi fancy wood in 45-90 and fit and finish second to none.
Great rifle
Forum: Black Powder Cartridge
I’ve been pan lubing for a while now , since 1 of my favorite molds has first 2 driving bands reduced I have to.
Will not work in lubrisizer I have. I pan lube as cast, never have I seen a lube...
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |