Search:

TylerR,

Regarding my issues with the feed inserts and interface with drop tubes, turns out it was a combination of too many perimeters and low quality PLA which had some bad tolerances.

Thanks...

Okay, thanks for checking, I'll continue investigating on my end. :-)

To not have to print for several days again, i cut out the interface parts from the .stls i listed above.

Running a new testprint now with a setting to print outer perimeter first, should get more...

I'm sorry if i was unclear, i was talking about the interface diameters. Where the droptube slides onto the bulletfeed insert.

Hey TylerR,

I just downloaded the latest files and tried printing the regular droptubes in 10 and 12, along with bulletfeed inserts .38, .44 and .45. but the .44 and .45 does not fit when printed...

This is the motor i used:
https://www.amazon.com/Lheng-Miniature-Geared-Motor-Terminal/dp/B07S2KWRWQ

At 12v it spins at the right speed, so i just connected it via a 3-way switch so i can change...

Right now, it's sized for .32S&W Long wadcutters. but it should be pretty easy to change dimensions to make it work with other ones.

I do, will make a package with the information needed. :) should be able to upload that within a day or two. :)

Absolutely, I'd be happy to. how do i get the files to you?

This is how the "final" verision looks.

https://youtu.be/VMyTQaUyaEs

https://youtu.be/N5ag-O9wV5Y

I ended up designing my own slideplate and adapter, It now works really well.

287852

It’s still a work in progress. But when good enough I’d be happy to post the parts.

If you’re talking about my .32:s, they’re just bullets.

It's a wheel/flipper/thingy that changes the direction of the wadcutter bullets, the custom collatorplate sends them facing down, but when seating them they need to be facing up. I designed it...

I made a new slideplate for .32S&W Long wadcutter. It seems to work.

287664

That seems to work well, I ran alot of bullets without lock-ups.
Could I possibly bother you to make a plate with a hole that fits the "Brass_Base_Up_Drop_Hole_Adapter" and where the hole is 18mm...

I'll give it a try and get back to you. :)

This is how is works, i think a slideplate that the bullets can glide down on instead of falling of the 90 degrees edge would help. See the one with lead bullets and how they lock up due to tumbeling...

Standard prusa i3 works fine with main body. Prusa mini not so much. :-)

Hehe! Yes, there is quite the time difference. :) our gun rights aren't that liberal, we have quite strict ones. Soo theres no way to carry, just shoot at gun ranges, apply for permit/license each...

Yes, I'm Swedish and live in Sweden. :)

Works now, both with copperplated and lead wadcutters in .32SW Long. Thanks!


https://youtu.be/G241T7ASU2w

https://youtu.be/9eKR1CApmIA

That would work fine too. :-) as long as there is 2.58mm more space for the bullet. :-)

TylerR, could I ask you for another favor? The feed_die_32_insert, could you extend the bottompart with 2.58mm as shown by the picture below, then I think it would work with Hollowbase wadcutters in...

This one printed correctly and worked perfectly. Thank you!

I'm also a bit confused, it is 46mm long, but when compared to a 9mm insert and case it doesn't look right. Something is wrong.
See picture.

287092
287093

Sorry for mixing units, I should...