Search:

still looking for 40-65 brass

bump

I have 3 molds so all set on that, thanks though.

I use an Ingento paper cutter for both the strips and the angle cuts. 318424

I spent the day at the rifle club yesterday. I cast and loaded three different PP bullets. One is patched to grove dia. the next one patched to bore dia. and the last one patched duel dia. I shot 25...

how much you want for 100 brass?

want to buy 40-65 head stamped brass. Thanks, Robert

.405? You must be patching to groove dia.? Or do you not wrap the .405 base? I'm not familiar with duel diameter. It appears the base is patched to groove dia. and the rest is bore dia. Correct? What...

I use a slight taper crimp. That may be my problem. thanks for pointing that out. This is my first year with paper patch bullets. So I'm learning as I go. So you're suggesting not to crimp and just...

I'm paper patching to bore dia. Hand seating bullets. I drop tube also

Thanks for the recipe. I've been working up some loads, trying to find the sweet spot. last 40 rounds was with 63 gr. I'll try 65 and then 67.I'm finding the more I increase the better the...

its a 40-65

that could be the problem. I use a bore wiper with 2 felts and it is pretty saturated. even though I run a dry patch behind it. I do anneal all my cases. I only use a .030 veg wad on top of the...

I just loaded and shot my first paper patch bullets. Can someone explain what I have going on here. The cartridge has what seems to be a hard baked on black ring around the lip of the cartridge after...

As I stated before I wanted a 40-65. So instead of a 45-70 with a 20 twist barrel it is now a 40-65 with a 14 twist. Also instead of a 5lb trigger pull it now has a 2lb trigger pull. Also, instead of...

Super excited! I was looking for a 40-65 but was having trouble finding one. So I found a new Uberti 1885 Highway in 45-70. Took it to the range and fired 40 rounds through it, cleaned it, packed in...

I may have come up with a way to lube the reduced band bullet with the lubrisizer. I don't size my bullets in the lubrisizer so I'm running a .410 bullet into a .410 die. the bullet measures .399 at...

Oh yeah, I forgot to mention, I'm using Swiss BPCR White Label lube its from LS Stuff

how bout I load a harder allow say 16-1 to avoid nose slump? also keep in mind that top band is reduced so that top groove isn't holding as much lube as the rest.

The bullet is a 40 cal. 420 gr. money bullet. The barrel is a 30" 14 twist .40-65 load will be Swiss 1.5 https://castboolits.gunloads.com/asset.php?fid=258220&uid=60272&d=1662034693

I have a 4 grease groove money bullet with the front band reduced. When using a lubrisizer, if I'm careful I can get all 4 grooves lubed. But because of the reduced front band there are times when I...

Since the 40-82 silhouette/ Crossno is basically a stretched 40-65 case. can 40-65 neck sizing die be used on a fire formed 40-82 silhouette case? I'm thinking by backing off the die that extra .300...

both are tapered straight wall cases and look at lot alike but the bases are different

Crossno

Want to buy CH4D 40-82 silhouette dies 3 die set and or file trim die and taper crimp die.