Search:

I have a blank 7/8'' die. A mill and lathe. I need a core die for a .22 spent case setup I bought. So I'm thinking .1875 roughly maybe somewhat larger as the derimmed cases are .203. So where to...

I'll take a cutter.

Mold needs to be .314 dia. and about 95 grains. The cases are 32 centerfire and will be sized in a 32S&W die. Any thoughts on how to build a mold. I have a lathe and mill just not sure on making the...

I have a .452 and .429. CH dies. On the .429 I use .40 S&W cases for half jackets. I use a lee case trimmer with a 10/24 allen pan head screw turned down to the inside diameter. Cut to your desired...

LMK a price when you have it figured out.

Thanks for the info.

I have wired several cnc machines over the last few months. The guy I do it for is now willing to make me dies and teach me how. This may take some time and I don't own the machines I will be taught...

Congrats

Thanks, for the info. I have made a couple of reamer stops for my lee case trimmer. Not sure I want to make to many. So I'm headed to the lathe to make an adjustable one. This will allow me to make...

Yes about bullet swaging dies. I have a precision mathews pm727m mill and a bolton 12 x 30 lathe. This is my home set up. I'm an I&E tech by trade. So I wired a friend of mines CNC machine shop that...

I'm in Wyoming. I'm wanting to use spent 9mm, 40s&w, and .223 into bullets I can use. Same as BTsnipers or C/H one shot dies to start. Maybe .380 as well. This seems simple to make a punch to seat...

Who makes their own dies? And is willing to help beginner /hobbie machinest.

I have a die that will derim a 22 mag like the 22 spent case. The result is a 1.260 jacket. I use a Lee case trimmer with an 8-32 allen bolt turned down to fit inside the jacket to trim jackets. I...

Can someone tell me your method or drilling, reaming and honing / polishing the internal of the die?

So I have a Corbin .224 dies missing the squirt die. I would like to make one. Any threads or Ideas on how to.


Thanks

I never had TAC powder shoot very well. Same type of groups with factory bullet. Usually one load that shot well was all. I switched to CFE 223 and have much better groups over a wider powder charge.

This may have been a topic of the past or i can't find it to my liking. I pick up all the brass I can find at the range. Most of which is 223 and 9mm. I have used several calibers of brass cartridges...

Looks like Richard retired and Dave is selling NOS or picking up where RCE left off. You may not like the prices, but you can still get what you need, It cost alot to re tool.

Bill, I used a home made mold. I also didn't care about the weight variance for a pray and spay AR. My 77 grain bullets are spot on. if you anneal the 22 mag case it goes pretty easy though the derim...

Were just getting started. We both work at a refinery. He's a machinist and I'm an instrument tech. He looked at my corbin dies and showing me where we could make improvement's and wanting to know...

You will have to trim the case to get a soft point at the weight you want. A Lee case trimer with a 3/16'' bolt from toggle bolt cut to length will trim the case. Chuck the reamer in a drill and trim...

I just started swaging 224 bullets. I used all sorts of different 22 cases and my lead core maker is rough. The cases weigh almost a grain apart and my cores are 2.8 grains apart. So when I start...

So here is the story. My wife of 21 years has a SXS shotgun made by H.J. Sterling. It was her dads gun given to him by ?. It has a game wardens badge on the hand base and an engraving of an elk on...

On the way to the shop tonight I passed a van with a sign. .223 AMMO FOR SALE. So I pulled over to let him pass back. Then I followed him for a bit . I wanted him to pull over just to ask prices. He...

It depends what you want. Just plinking I don't think I would waste my time. If you want best overall performance I would start out annealing every firing.

Thanks just bill. A good read. I don't have to make my own tools. Just like the idea I can. Dave Manson would probably make what I want for a fair price.