Search:

I have inherited several different lubes that I don't think is made any more and I was wondering if anyone had any experience with them.

First is Hodgdon brand bullet lube, it is in white and red...

My tinsel fairy story goes like this. I was casting from a bottom pore pot with a Lee 158 SWC mold in August. I was sweating profusely. I believe a drop of sweat went into one of the mold cavities as...

I picked it up used. I will look into that. I need to learn how to disassemble a 94 anyways. I like to be able to work on my own guns when needed. Thanks.

Shorter did not work but longer did. Seated the bullets out to 2.550 on the 375296 and 2.500 on the 37-250 and they feed fine. It forces me to crimp between grease grooves or in the first grease...

I tried seating the bullets deeper into the case a little at a time without any luck. The nose of the bullet still hits the bottom lip of the chamber a little more than halfway up. I tried racking...

One thing I have noticed is that when I move the lever to full open the cartridge lines up fine with the chamber. As soon as I start the bolt forward, whether fast or slow, the lift drops slightly....

I am casting the RCBS 37-250-FN and the Lyman 375296 for a 1980 model 94 BB XTR 375 Winchester. The problem I am having is that neither bullet is feeding into the chamber but the flat noses of the...