Search:

Thats wierd because all your color sample ral numbers that you have posted match with powder by the pounds numbers,which tells me something.

Powder by the pound has the same traffic purple you are seeking as thats where his stuff comes from.
RAL 4006 is item number.

I use this Crystal Clear Super Durable High Gloss Clear Powder from powder by the pound.
Works real well!

What do you use that melts away carbon?

I just use saw dust with no problems.

I use 1/4 ww to 3/4 pure lead,then powder coat.
works great for my 45 acp,10mm,44 mag,38spl and 9mm.
You dont need as hard lead when you powder coat!

I thought the BB's where what helped make static?

Correct,thats why we powder coat!

Im sure it was Trumps fault!

i warm my bullets.
130 degrees for about 2 minutes.
I also run a dehumidifer and keep moisture under 40% in my shop.
Try warming the bullets.

$14,000 to $22,000

Well smoke does not sell it cheaper then where he gets it.
So I would have to say powder by the pound.

powder by the pound

Ral 5015 from powder by the pound is what your looking for.
sky blue-aka carolina blue

Did you read my reply in this thread?

80% of the people on here use powder by the pound,weather they know it or not!
Prismatic is another seller that gets used alot.
Then some use eastwood.
Use any of those three and you will be...

A dehumidifier in my shop made a world of difference.

I can run softer lead in some of my pistols.
but a couple have feeding problems if it is to soft.
Must be the feed angle.
I just keep my hardness at 10.

First thing you should do is slug your barrel.

Sounds like maybe your bullets are sized the wrong size.

I run a dehumidifier in my shop.
I keep humidity under 40% at all times and never have had a problem.
Before I started using a dehumidifier,i had problems with the powder sticking on,to much...

I seat then taper crimp in another step.
never have a problem with leading.
And I am running them hotter then you.
Make sure the bullet passes the smash test.
If your seating and crimping in one...

I would use copper chore boy to remove all leading,then clean your barrel spotless clean then use jb bore paste to lap the barrel to make it smoother.
This will take care of your problem!

Get better powder,order from powder by the pound!
Great stuff!

I have had great luck with powder from powder by the pound also!
Its easy to use and the results are great.