Search:

Well , never gave that a thought , only have 30 if that I found in a junk box the old man had . Guess I'll sh__ can them , safely of course !

Good to know , Thanks

Thank you Don

Looking for a load for 54 grain tracers / what powder is the best for this bullet ?

Tumbling tends to make soft things round !

Wasn't Charlie Darnall was it ?

Shot my first deer at the age of 13 with a 1884 trapdoor , rifle was taller than me ! What a trill !

I have and it's great for long term storage of your prized firearms .

Just a reaction of two or more dissimilar metals introduced to acid !

And Vista Outdoors also does not manufacture gun powder unless they own the two powder producers here in the USA !

Alliant doesn't make powder they just market it !

Try this , 85 oz pure lead , 10 oz. 50/50 solder and 5 oz. antimony .Can't be much simpler than that !

I don't know if it's been mentioned before but that grey powder you mix in Tannerite is nothing more than fine aluminum powder which would give you more than enough to make 1000's of primers from a 1...

https://www.youtube.com/watch?v=Eo5ZLdbcZsk

Put an index mark on your socket and count the rotations and hold brass at the very tip of the light part of the flame ( the hottest point of the flame ) and make sure the drill turns at a constant...

Florescent lights some time will effect my scale with the same problem you're having , just saying .

I guess you know the bolts are the same in rear charging and side chargers but the lefts are different . It's the BOLT CARRIER’s them self that are different

What style of bolt handle ? If it’s the round style you may have trouble with it coming loose after steady use that's why theye came out with the Gen 2 .


DAN

I use a hot plate or an old electric stove burner ( flat element style ) and heat till glowing red . I make 45 and .458 with the same case but I put the core in first and fuse it to the jacket ( of...

I definitely have to agree with you on this !

Jim147 hit the nail on the head !!
You need a small base sizing die to use that old military brass , more than likely base at the web is oversized and and is were the hangup is . If the die and...

Modified moulds my friend and custom check maker !

.009 brass shim stock is all I ever use and never had a crack or split . I've gone through 8 or 9 rolls over the last few years making 30 , 38 , 41 , 44 , and 45 cal. and only problem I've had is a...

I have this mould and it cast .307 with my alloy ( range lead + 2% tin ) and by the way , THIS is a BOAT TAIL type bullet not meant for a gas check .

I have a few 32 rim fire fired empty s from shot shells your welcome too if you want but you'll have to wait till I can find them !