awesome job Marcos!!! The dies look fantastic. Glad you went with the extra draw stage to get that longer length. Look forward to seeing some pics.
Type: Posts; User: andrew_six_point_five
Forum: Swaging
awesome job Marcos!!! The dies look fantastic. Glad you went with the extra draw stage to get that longer length. Look forward to seeing some pics.
Forum: Swaging
I had a quick look at Hornady .452 gas check prices on Brownells website, per 1000 ($54.99) they are half the price of j4 and corbins .224 jackets. I think the idea has some merit. The base thickness...
Forum: Swaging
Final checks of the .308 jackets include concentricity and length. I am still using my original concentricity gauge which gives me a pretty good idea if the jackets are to my tolerances (less than...
Forum: Swaging
Finally got my pinch die and punch back from heat treatment. Spent Sunday afternoon lapping the die to size. Also ordered some shim washers to allow for setting the height of the die for different...
Forum: Swaging
Marcos, glad to hear you have a plentiful supply of 9mm brass. If you use copper strip be prepared for a bit of a price shock. And yes, we got a new PM. A bit more to the center than Adern in NZ. For...
Forum: Swaging
Hi Marcos, good to hear from you. Yes 2 draws off a .75 disc is no problems. If you are trying to get a .353 jacket in one draw (cup only) you could try 5/8" or 16mm disc. This would give you a short...
Forum: Swaging
Thanks plus1hcp, I'll have a few more pics soon when I trim up some new .308 jackets
Forum: Swaging
Attached are pics of the 0.75 blank disc next to the 1". The cup is 0.40" diameter and then second draw is .305". I included a reduced length .261 jacket but I plan to go straight to 6mm (.240"...
Forum: Swaging
Hi fc60...yep, I left out a zero! Thanks for that. I'm continually jumping from metric to imperial. It always catches me out.
Forum: Swaging
Hi ebb, I'm using C12200 copper 0.70mm (.275") thick, fully annealed for both the 1" and .75" discs.
Forum: Swaging
I haven't posted for a while as I'm still waiting patiently for my .264"swaging dies. In the meantime, I've been working on a batch .308 jackets. I decided to add a few calibers to my tooling as I...
Forum: Swaging
Attached are images of the cup and first draw dies that will be ok for pistol jackets
292431
292432
Forum: Swaging
Hi Mfg,
Its good to hear from another jacket maker. I think I can help you on a couple of your questions. My drawing dies are for rifle but the first draw jacket after cup is approx .400 and...
Forum: Swaging
Close up of the dies. Thread is a M25x1.5 and 2mm cone shoulder. This allows the die to center in the die plate eliminating alignment error
290227
Forum: Swaging
Hi TrxR, It is really hard to get them as accurate as J4 or Hynes. My goal was to get a jacket as accurate as possible with a modest budget and resources. I'm really surprised that I have gotten this...
Forum: Swaging
Some pics of the .264 jacket being drawn then trimmed.
289291
289292
289293
289294
Forum: Swaging
I finished lapping the final .264 draw die over the weekend. Happy with .26080" as the finished diameter. Just a fraction under .261". Not only did I run a batch of jackets through but also used the...
Forum: Swaging
Thanks M.A.D and MrWolf. I had a look at the acrolaps website...nice product. Do you know if there is an agent here in Australia? A couple of barrel laps near .300 and .260 would be handy.
Forum: Swaging
Hi Firefly, yes the 2 ton press works just fine. I added a 2 foot bar instead the one supplied. All the force needed for cupping to final draw. The blanking though requires either higher tonnage or a...
Forum: Swaging
Just got my 2nd and 3rd draw dies back from heat treatment. They are also 4140 nitrided to 60HRC. They have been machined undersized so I've been lapping the 2nd draw die to size. This die can also...
Forum: Swaging
Here are some of my die drawings as a reference
289119
289121
Forum: Swaging
Hi ShaneJ45. I can assure you that there is no place to go to learn about jacket making. Read as much as you can online on deep drawing especially copper alloys. But first create in your head a...
Forum: Swaging
I'm using 1 inch discs 0.027 thick C12200 copper. To give you an idea of the required tonnage, I used an online calculator to work out tonnage required for a flat faced punch and a punch with shear...
Forum: Swaging
Hi Traffer, I'm just out to concentrate on one thing...making a .264 bullet for my favorite rifle. I've read a fair bit on deep drawing but always happy to find out more...thanks for the link.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |