RepackboxTitan ReloadingMidSouth Shooters SupplyRotoMetals2
WidenersLee PrecisionInline Fabrication

Search:

Type: Posts; User: Tripplebeards

Page 1 of 100 1 2 3 4
Results 1 to 25 of 2500

Search: Search took 0.22 seconds.

  1. If you knock off about 40 fps per inch from from...

    If you knock off about 40 fps per inch from from 24” to 22” you will probably be very close. Not enough to worry about…or that you will probably tell the difference in drop IMO…. till you get past...
  2. Forum: AirGuns

    Thought I had an old photo of it in Imgur. It’s...

    Thought I had an old photo of it in Imgur. It’s the only “economy” 22 cal “air” spring pistol I’ve found that will dispatch raccoons and possum with the right pellet choice when using it for my...
  3. Forum: Our Town

    There is a vacuum line under the intake manifold...

    There is a vacuum line under the intake manifold on the passenger side that liked to pop off of my 2004 f150 with the 5.4L. A real head scratcher. It isn’t possible to see it. I paid to have it...
  4. Replies
    19
    Views
    447

    Forum: Our Town

    I have put them in extra plastic cases and then...

    I have put them in extra plastic cases and then shipped with cardboard over them. My latest ones I wrap in foam sheets and bubble wrap extremely tight and tape them. I then find used factory...
  5. Replies
    9
    Views
    341

    The previous owner either fished in heavy current...

    The previous owner either fished in heavy current or went to the ocean. The tear drop mold is 5.5 and 8.5oz! I’ll never use those. I cast up some of each accept for those. Might end up trying to sell...
  6. Replies
    9
    Views
    341

    Thanks, at least I know what it is…I’ll never use...

    Thanks, at least I know what it is…I’ll never use it.lol
  7. Replies
    9
    Views
    341

    Any idea what this is?

    Was at the thrift store last week. Found a lee .356 2R mold in the box for $4.95. A reading 300WM 2 die set for the same. Bought a couple of stools and had to go back later to get them with the...
  8. Replies
    19
    Views
    447

    Forum: Our Town

    Fed ex is your safest and cheapest bet. Also the...

    Fed ex is your safest and cheapest bet. Also the fastest for me. No FFL needed.

    Your shipping Golf clubs, tools, “gun parts” or torque wrenches. If you box it it as tight as a drum there will be...
  9. Forum: AirGuns

    I mounted a camoflauge tasco PP2 red dot on my...

    I mounted a camoflauge tasco PP2 red dot on my Browning 800 express. It shoots .5" groups or better off a rest at 25 yards with rocket and terminator pellets. I also removed and polished the trigger...
  10. Forum: AirGuns

    I like my browning "branded" 800 express 22 cal...

    I like my browning "branded" 800 express 22 cal brake barrel pistol. Hits like a freight train. It's powerful enough for squirrels and rabbits at backyard ranges. Complete pass throughs with rocket...
  11. Replies
    42
    Views
    1,091

    Poll: After the looks of the mold above I'll make sure...

    After the looks of the mold above I'll make sure to order from places with excellent return policies. Never saw one like that before. I just bought a .356 2R used in a box from the Army Navy store...
  12. Replies
    612
    Views
    138,029

    I was at the Army Navy store Friday. Got a lee...

    I was at the Army Navy store Friday. Got a lee .356, 125 grain 2R mold in with box for $4.95!!! I also picked up Redding 300Win mag 2 die set for the same. I went back yesterday to pick up a couple...
  13. I finally had a chance to add a second coat of PC...

    I finally had a chance to add a second coat of PC this moring. I measured a half dozen and they all were pretty consistent at .404". So they all grew .002 with the second coat of PC. I will load them...
  14. Did an experiment with my conventional oven years...

    Did an experiment with my conventional oven years ago. The PC baked evenly the best at 445 degrees. I tried fem 400 degrees in 5 degree increments to 455 degrees. No slumping. I bounced off the...
  15. Guess I need to get a .401 lee sizer die and find...

    Guess I need to get a .401 lee sizer die and find out. Figured the extra 1000ths of clearance would help with accuracy and not leading my bore. I will hopefully get a chance to put another coat of...
  16. I might PC another coat on about 15 or more...

    I might PC another coat on about 15 or more rounds and to build up the diameter to .403 and see if it quits leading. If so I will eliminate a fitment issue. I believe I had just powder residue with...
  17. So now I’m back to scratching to my head why I’m...

    So now I’m back to scratching to my head why I’m getting leading towards the muzzle.
  18. So was 7 grains of unique for 10mm with a 159...

    So was 7 grains of unique for 10mm with a 159 grain boolit still at close to max pressure or over? I’m guessing so.
  19. A poster ran this for me a few days ago. I had a...

    A poster ran this for me a few days ago. I had a few guys look it up and said up to 6.4 grain with a 180 cast boolit. Does this look and sound to hot? The 5.8 grain load was pretty tame. The 6 grain...
  20. 1.270” is as long as I can make them or they...

    1.270” is as long as I can make them or they won’t fit in my magazine.
  21. I appreciate the heads up. I loaded at 1.270” the...

    I appreciate the heads up. I loaded at 1.270” the data I used listed FMJ at 1.250” so I was figuring on less pressure and velocity loaded a little longer. Apparently not enough from what you are...
  22. My HPs weighed 158 grains. Still over pressured?...

    My HPs weighed 158 grains. Still over pressured? I used data from 165 grain FMJ data. Max was listed at 7.4 grains.
  23. 2 coats of PC better for higher pressures?

    I am stumbling along with my Glock 20. I have tried ACME .401,180 grain, HiTec coated boolits with zero leading. I believe the ACME boolits are Pune 16.9 BH according to their website. The load I...
  24. Replies
    20
    Views
    667

    7600, 30-06! My dad bought it for me in 84’ from...

    7600, 30-06! My dad bought it for me in 84’ from Kmart. Didn’t use it last for the 2nd time since it was bought for me because the Leupold was defective and it as out of IMR4831 which I used for the...
  25. Replies
    17
    Views
    718

    When I bought my anacondas back in the '90s all I...

    When I bought my anacondas back in the '90s all I did was take mother's polish and rub them for 5 minutes. They went from a dull satin to a bright shiny Chrome.
Results 1 to 25 of 2500
Page 1 of 100 1 2 3 4
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check