Search:

Walks I dry coat by the S&B method

Yes I powder coat pellets for my spring air rifles and so far have no problem with the coating and seems to have helped with accuracy.

WALMART sells inexpensive Black & Decker air fryer toaster ovens that I use work great for me.
Set the temperature knob on the Broil setting the fan will run and the temperature is a steady 400*....

Thanks for the reply and info you may have saved me from a failed experiment.

I cleaned a bunch of .38 148gr HBW with lacquer thinner to get the factory wax lube off.
I used a pair of tweezers to pick the bullets out of cleaner that I also us to pick up the bullets I remove...

Here's one I recovered from a dirt back stop, .38 148gr swaged HBWC291016

These are commercial swaged HBWCs made by Hornady.
I coated them with Smokes traffic Blue PC

I have a few thousand .358 hollow base wad cutters on hand and shoot them in my custom 1911 .38spl. The problem is they lead the throat of the barrel so I decided to clean and PC some to see if it...

Here's some JD Green .45 acp loaded290635290637

New to powder coating and have tried the HF white with not so good results. Got some of Smoke's JD Green & Blue and have had very good results.290261290262
I also picked up a couple snap lock bowls...

A little late to the party but this is my first attempt at powder coating.
These are with Smokes blue powder

I have one of the new HP Diamond backs in 3-12X42 with side focus and love it on my 35 Whelen. I believe my next one will be the 2-8x40 HP.

Any one have any experience with the clamp on muzzle brakes? www.grizzlygunworks.com

Tried reduced loads and the thing is a scatter gun compared to the full charge loads, full charge 180gr loads shoot 1/2" to 3/4" at 100yds and the reduced loads are lucky if they make 2" at 100yds....

I have a 300Wby that I don't care for the recoil since it causes my eyes to blur and can't get a second shot off. I would like to rechamber the barrel to 308 Norma or 300 H&H. Muzzle brakes are out...

I have an old CH Super C press that I started out with and you had to change the rams when changing calibers. The up grade was a RCBS Reloader II which I still use and works fine. I do have several...

Do you use any filler in the cases to keep the powder in place?

I know this is an old post but curios to hear how these Boolits worked out. I'm just getting started and need all the info I can get.

I would be interested in one of the CMP rifles since my club sponsors youth .22 shooters and have a youth rifle team.