Search:

thank you all for the answers. and sorry for the delay I got real busy with other things. so I got a new mold ohaus 30-170-f and the boolits it drops chamber flawlessly. I also changed my alloy mix...

314650314651314652314653


this boolit is right out of the mold little over a week ago. there doesn't seem to be a taper till right at the nose

I'm using rcbs rifle lube. I do not heat my lube. The ring is coming from seating the bullet.
There is no indent or marking from sizing.

thank you to all that has responded and after reading everyone's input I checked a cast boolit before sizing and after sizing and the bullet is gaining .002-.004 in size at the tip. so should I try a...

I have had this gun for over 15 years. always shot jacketed bullets threw it. rockingkj is correct the ring is from the seating from my rcbs dies.

so I have searched and the minimum for coal is 2.450. would it be safe to shoot them at the 2.380 length.

I forgot to mention I did slug the barrell at .308 and the bullets are sized at .310 .

To start I hope this is in the right spot. I'm trying to load for my marlin 336 30-30 and im having issues with the oal of the bullet and not being able to close the lever. I'm using winchester brass...