Search:

Thanks for the input guys. I will look into that book as well. It looks like I either need to just FL size it to bump it back .001-.002 or just resize 2/3 of neck so it doesn't pull the shoulder...

Howdy, I need some advise on reloading for my savage 308. I have some once fired win brass that I was starting to resize. I don't have a neck die yet so I was using a FL Die. I resized so the...

+1 for what noylj said.

+1 for WSF in 9mm cast loads. Power Pistol was actually a little better with my cast loads but not by much. I use Titegroup for my 12ga target loads and most pistol loads. I have even tried it in...

I guess I must be lucky. My brother in law works in a auto shop and gives me all the WW I can normally handle....No im not sharing lol:D

175gr lees work well out of my M&P 40. I would recommend a lube groove bullet. THe TL bullets I have can give some wicked leading. I have put about 5000 of these through my M&P they shoot well but...

I use my homemade felix lube it works well with a Lee 120gr bullet regular lube groove. There are prob better cast bullet molds to use in the sig but with some care I made this work pretty well.

I said earlier I wasn't going to shoot lead out of the sig...well I just had to try it. I am using the same 120gr TC mold from Lee as posted above. I found I can get it to work quite well in my M&P...

I also have a 357 sig barrel for my M&P 40. I was wondering how a 147gr mold would work? Has anybody tried one of them yet? I too have been thinking about lead through the sig but decided I would...

I 2nd what mooman76 said. However, I did buy some 357 sig brass from sothern belle brass for like $32 per 1000. Other people are charging lots more. From what they told me local LE uses 357 sig...

Quick note. I spotted a NEW lyman cast bullet handbook. It should be out by now. I found it on the flyer for midsouthshooters supply. I use american select for my low low loads in my 30-06. Nice...

As far as light loads go I have used titegroup, american select, universal, and wsf. All were accurate out to about 100 yards but need to adjust scope. Not sure FPS don't have my crony yet. But I...

Sounds like the powder is melting the boolit causing some leading you could try lower velosity and it may help I can shoot non gs boolits out of my 30-06 with no leading using reduced loads around...

smoke the muffin pans. I used a pice of pine scrap that I lit on fire and used it to smoke the muffin molds. Once cooled they fall right out.

I have used the Power pistol and liked it. It burns clean in my gun but seemed flashy and more snap. That is why I was looking for alternatives. I have been trying some american select and the...

I use 4.0-4.2 gr tite group at 1.28 oal out of my M&P 40 shooting a 175gr swc water dropped. Crimp just enough to take out the belling maybe a smig more. Low recoil and great accuracy. But it...

maybe it was unique. Anybody else have any reload info for H. Universal (ie universal clays).

Hey all I am looking for some load data. I am currently testing some wisper loads using 5gr tite group in my 30-06 with about a 170 gr lead boolit. I have some H. Universal and I know there is some...

Thanks I will try some of that any other thoughts anyone.

Howdy, I just wanted to know your thoughts on the best powder for lead bullets in the 40 S&W. I have used power pistol and titegroup. They both shoot great but are a little smokey. Titegroup...

I got a bunch of lead from a mechanic I know and got a ton of ZN weights. This was a BMW dealer so maybe they are using more of that stuff than us made? I will have to start stocking up more I hate...

I have shot a bullet similar to the 38-40 shown above that was commercial cast. It did a fine job in my M&P. I think the commercial cast bullet may have been from a saeco or rcbs mold and it had a...

slim I have cast a couple thousand of the 175 gr TL bullets. I don't size them. Just cast and water drop and then lube them. Im not looking for top notch accuracy just something to plink with. ...

I use 175 gr TL with 4.0gr hodgdon titegroup works good. I have also used Alliant Power pistol at about 6.5 gr with similar results.

I am finding my local shops have plenty of 209 shot shell primers but 0 small pistol, 0 SR and just a few LR primers. Powder was was starting to grow short.