Search:

sent a PM for the files

they are coming out with .45 Colt in SPP, now--another project for you?

walt

another echo of above info: All my .45 Colts, Ruger Vaqueros and Marlin 1894s use .452

I shoot SASS and find them to be fine . . . course some of our targets are as big as a barn door :-D

a bit of a side trail here but that's the reason I went to powder coating.

I would find the lube had melted a bit and covered the rest of the bullets--this is the ones I cast and lubed and were...

If you're not smearing lead across the top of the mold or under the sprue plate you're good to go

I cast a bit cooler so I don't have to wait as long for the lead to harden but that's my choice
...

did the same thing
found that the gluing method wasn't holding so I went this route
drilled UNDERSIZE hold through wooden and metal handle parts
came back and drilled a correct-sized hole in metal...

I made an aluminum spacer that goes between the shock and recoil pad. with a short section of hose to keep the suppressor from moving the spacer keeps everything nice and tight--didn't want to...

I am in awe of your skills and talent

living in The Republic I can say our summers are a mite warm. PC doesn't melt like the lube did.

also machines stay cleaner without the lube getting all over them

size one time, after PC.

figure this will bring the bullets into specs no matter how heavy the PC coating is.

too lazy to do it both before and after

I have a 20 lb pot and cast till the PID temp probe is above the surface of the lead

interesting, I weighed the sprues, mine are all one long piece as I keep the pot flowing as I move the 6-banger...

my wife would like them.

I would mix with another color--just a bit and see what color results. you can always add a bit more--this is what I did with the green and got passible colors while I...

The Eagle has flown the coop.

I finally got done to dust in my tub so cleaned it out and started fresh--GREEN will never darken my door, or bullets again

something to add to your list, down the trail: a PID. It will keep the temp of your pot within 1°

I built mine buy HATCH, on this site, sells them

the RCBS PRO-MELT II has one built in but...

have both NOE an Arsenal molds, along with a bunch of Lees. No doubt the first two are much better but not going to toss the Lees.

Always felt the Lees were really a "kit" that you had to work on...

When I went from lube to PC I invested in a number of these ▲

I use them in an inverted press so all I have to do is drop the bullet in the opening and work the handle. much easier than trying to...

it does work but I haven't had to use it other than to check it out for myself

I use the black BBs in mine and that does a fine job of generating the static charge I need. 'course I live in...

on post #34 above I said the green was gone

I added a bit of silver powder to my bowl and PC a bunch of .38 bullets

It's BACK!
There is definitely green somewhere in the coating
325030

and here is the visual proof (L to R)
final bullets in green
gray powder added
finally blue added

324744

I've got a wide assortment of colors--the green just wasn't my cup of tea

decided to use it up--it's taken years but that ship has sailed--finally

have several tubs of different colors so going...

I am now giving my molds a coat of mold release before each session--usually 18 lb--run the original Pro-Melt down below the PID sensor each time.

they say to bake it in but it takes all of 2...

now's the time to start looking at accessories
https://www.opennrg.com/shop/p/rcbs-pro-melt-upgrade-kit

I also converted mine to "pull down to pour" easier on my twice operated-on shoulder
I...

good as any--just as long as not green :mrgreen:

The Eagle has landed--used the last of my zombie green powder today!

thought it would never happen but dumped the last remaining spoonfuls into my shake and bake bowl this a.m.

and best news is...

out of country source
https://tecmagex.com/en/lee-load-master-shell-plate-19l-10mm-auto.html

https://www.amazon.com/LEE-PRECISION-No-19L-Load-Master-Shell/dp/B00162UO2A $56!!!