Search:

I just went through the same questions. I bought an AYDT style rifle. My bore measures .318 and groove is .322. Chamber cast shows a funnel type chamber
I was interested in a stop ring bullet, the...

I put all the bullets I cast into a container and cull them as I run them through the sizer and lubricator.

I'm not fond of trimming either.

2010 gt500180351180352

I have a CZ 550 in 9.3x62, not with the Mannlicher type stock. Very nice rifle.

Keep me posted on your venture.

I have not had luck with the RCBS boolit. I started with 44 gr 5744 and went to 48gr. Cant keep the groups on a B16(25yd pistol target) at 100 yds. Not sure what's going on. The rifle will shoot...

[QUOTE=Green Frog;3820766]I would suggest you cast a few and make up a half dozen dummy rounds... try them in the gun to see if they cycle. If yes, question answered. If not, seat a little deeper...

I believe you are correct.

Have not measured cases. I'll try that, As above mentioned I have a 358495 4 banger and would like to utilize that boolit.

Have not. Pistol was designed for 38 Special wad cutters. Have 358495 mold so trying to use that boolit

Anyone shooting the Lyman 358495 in a S&W Mdl 52-2? I have tried that boolit but have trouble with the length in the magazine. If I seat the boolit to the edge of the full diameter it leaves the tit...

Got the RCBS neck expander. Worked as I needed. Now maybe I can get some trigger time with this rifle using cast boolits without getting the snot pounded out of me.Thanks to all for the suggestions.

I ordered mine from Midsouth.

Thanks guys. I'm going to try the RCBS neck expander.

Anyone casting for the 416 Rigby? What are you using for a expander to start the cast boolit? I have a CZ 550 american and casting the rcbs boolit. Using rcbs dies, they size too tight to seat the...

One of the best engines Cat ever made.

152723

I paper patch that boolit in a Ruger #1 in 9.3x74R with excellent results.

Individual Microwave popcorn packets
Peanut Butter
Granola Bars
Q tips
The popcorn packets can be crammed into any voids in the box. Be surprised how many can be stuffed into an already full box....

Update. I loaded 10 rnds each of 23,24,25,26 gr 4759 behind the RCBS 300 CSA boolit sized .409 and lubed with 50/50 seated to crimp groove with a light crimp. Nothing changed in the loading except...

NEED is not a factor, WANT is where it's at. Go for it.:-D

Runfiverun--When I fire formed the brass I only loaded five rounds of each powder charge. I used different powders 4198 5744 and 4759. The best was the 4759, so I loaded ten of the loads that looked...

Stubshaft-- 1/2 grain spread.

CBRICK-- All new brass, all Rem, flash holes uniformed, first firing after fire forming.