Over here in England one of the guy's on one of the shooting forums that I converse with has 2 Range rovers an older one 5 years old and a newer one 1 year old the problem he lives in London .
The...
Type: Posts; User: andy h
Forum: Our Town
Over here in England one of the guy's on one of the shooting forums that I converse with has 2 Range rovers an older one 5 years old and a newer one 1 year old the problem he lives in London .
The...
Forum: Muzzleloading.
Over here in not so sunny England we tend to use the .457" ball in the .45" ruger old army and the smaller one's in Pietta/Uberti .44" etc, You can use the .457" in all of the .44" pistols but it ...
Forum: Muzzleloading.
Over here in England CCI no11 are $16 to $24 a hundred , Swiss black powder is $122 a kilo and the own brand black powder of one of the only source's in England is $54 for 1.1 lb.
Forum: Military Rifles
Over here in England a high number of Enfield action rifles were converted over to use 7.62-.308 for target use and military marksman/sniper use and the only thing I can remember is the Nra at Bisley...
Over here in England you can pick a blued ROA up for about $200-250 or a stainless version for $ 3-400 at the gun auction's , When I was working over in LA (USA) last year I went into American gun...
Forum: Vintage Reloading Gear
Thats a Lachmiller decapping tool ,https://www.henrykrank.com/lachmiller-tool-for-decapping-38-pistol-cases-and-rifle-in-similar-calibre-acs242/
Forum: Casting Equipment
Late reply both LYMAN and RCBS sizing die's use US standard AS568 no 015 orings 9/16 x 11/16 x 1/16 70 shore/Durometer ,Mc Master part number 9452k59 $5-43 per 100 , Hope this helps.
Forum: Casting Equipment
Pressure nut - #16, 13/16 x 1-1/16 x 1/8
Die - #35, 9/16 x 11/16 x 1/16
Forum: AirGuns
If you are looking at flters I would go for the diving one's as they have been designed and tested to work at the advertised pressures, Some of the aliexpress/amazon chinese filters have way to short...
Forum: AirGuns
The corrosion noted I have encountered during my 18 years of working with high pressure (up to 10,000 psi) air and filtration systems , I first encountered it on the early breathing air filters that...
Forum: AirGuns
Coltri sub do a refillable high pressure personal inline filter for about $200 using silica gel and charcoal , That will capture moisture and oil as oil typically travels as an emulsion with water....
Forum: Our Town
Dune is a 2 part film , They started filming pt 2 in july ,The second part will be released in November 23.
Forum: Muzzleloading.
I had the 1858 NMA target in stainless and after maybe 7-800 shot's noticed a bit of gas cutting on the strap , I do not know if this was down to me using felt wad's under the ball or not.
Forum: Leverguns
Aperture in using the .070" as the .125" it ship's with I find a little to open also I painted the front blade dayglow orange to contrast against the target's.
Forum: Leverguns
The dovetail on the Rossi 92 is non standard , It is larger ,I purchased a Skinner rear aperture and used a triangular swiss file and shaped the sight dovetail to fit as skinners say on the website ,...
These dimensions have been taken after roll crimp not card to the top of unrolled case.
I measured some factory Eley cartridges and from the surface of the card to the top of the roll crimp i measured .201 / .160 / .158 /.162 . /.160 / .170.
Reloading over here in England using top card and roll crimp 1/4" is about right from the top of the card to the top of the case before rolling , When i get home i will measure some original factory...
Those are Eley sure fire primer's meant for reloading the primer battery cup instead of replacing the whole primer ,They went into obsolesense 40 year's ago.
Forum: Military Rifles
I had a no4 mk2 and in competition the trigger was one of the big letdown's so i copied the Huber setup and drilled and inserted a ball bearing into the bearing surface of the trigger , The...
Forum: Our Town
Have a look at the 5th picture down on this international ammunition association web page.
It appears to be a cartridge for a Powder actuated reefing line cutter M9 Cut's a nylon parachute line....
Forum: Our Town
I went to see the Vulcan at the last public display she will be doing today .
150443
Forum: Our Town
I am extra carefull now ever since my other half sucked a live one up with the old hoover , The resultant noise was not just from the primer going off.
It's not a barrel shroud it is a moderator fitted to a 20 bore o/u.
Forum: Military Rifles
The 'Z' suffix Refers to graphite glazed nitro-cellulose propellant
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |